SECTION V HEALTH, FIRST AID AND MEDICAL DATA PRIMARY ROUTE(S) OF ENTRY ACUTE & CHRONIC HEALTH EFFECTS & EFFECTS OF OVEREXPOSURE FIRST AID & MEDICAL INFORMATION INHALATION (DUST) ACUTE - MAY CAUSE COUGHING SHORTNESS OF BREATH. CHRONIC-MAY AFFECT BREATHING CAPACITY REMOVE TO FRESH AIR, APPLY ARTIFICIAL RESPIRATION AS NEEDED. OBTAIN FIRST AID OR MEDICAL ASSISTANCE. INGESTION NO KNOWN ADVERSE EFFECTS BUT INGESTION NOT RECOMMENDED. OBTAIN FIRST AID OR MEDICAL ASSISTANCE, IF NEEDED.
In compliance with Federal OSHA Standard 29CFR 1910. 1200 contained herein are Material Safety Data Sheets (MSDS) for the entire product line currently offered by KLINGSPOR ABRASIVES, INC.; for coated abrasives and bonded abrasives. The information and recommendations set forth herein are taken from sources believed to be accurate as of the date hereof; however, KLINGSPOR ABRASIVES, INC.
MATERIAL SAFETY DATA SHEET SECTION I: IDENTIFICATION Manufacturer: Black & Decker Accessories 701 East Joppa Rd. Baltimore, MD 21286 (410) 716-3900 (Emergency) Hazard: Rating: Product Name: Product Type: Resinoid Bonded Cutting Off and Grinding Wheels Masonry/Concrete/Asphalt Health: Flammability Reactivity 1 0 0 SECTION II: COMPOSITION PER 20CFR 1910.
SECTION IV: HEALTH, FIRST AID AND MEDICAL DATA Primary Routes Of Entry First Aid and Medical Information Inhalation (during grinding) Remove to fresh air Artificial respiration as needed Obtain medical assistance Ingestion (during grinding) Obtain medical assistance Skin, Contact & Absorption (during grinding) Wash affected areas with soap and water. Obtain medical assistance Eye (during grinding) Wash with large quantities of Water. Obtain medical assistance.
SECTION VII: STORAGE, HANDLING AND USE PROCEDURES Normal Storage and Handling: Normal Use: Steps to be taken in case of leaks and spills: Handle abrasive cutting off wheels and grinding wheels carefully to prevent damage from shock, heat, etc. Store in dry protected area free from humidity, freezing temperatures or extreme temperature changes. Consult ANSI B.1: Safety Requirements for the Use, Care, and Protection of Abrasive Wheels. Use with adequate ventilation. See OSHA 29CFR 1910.
SECTION XI: TOXICOLOGICAL INFORMATION This product is considered a consumer product / finished product. No data is available regarding ingestion or other contact with the body toxicological level. *See Section III on risk identification for more information in case of normal use SECTION XII: ECOLOGICAL INFORMATION Ecotoxicity: The product is inert and presents no direct risk for aquatic and terrestrial life.
MATERIAL SAFETY DATA SHEET SECTION I: IDENTIFICATION Manufacturer: Black & Decker Accessories 701 East Joppa Rd. Baltimore, MD 21286 (410) 716-3900 (Emergency) Hazard: Rating: Health: Flammability Reactivity Product Name: Product Type: Resinoid Bonded Cutting Off and Grinding Wheels Metal (ferrous) 1 0 0 SECTION II: COMPOSITION PER 20CFR 1910.
SECTION IV: HEALTH, FIRST AID AND MEDICAL DATA Primary Routes Of Entry First Aid and Medical Information Inhalation (during grinding) Remove to fresh air Artificial respiration as needed Obtain medical assistance Ingestion (during grinding) Obtain medical assistance Skin, Contact & Absorption (during grinding) Wash affected areas with soap and water. Obtain medical assistance Eye (during grinding) Wash with large quantities of Water. Obtain medical assistance.
SECTION VII: STORAGE, HANDLING AND USE PROCEDURES Normal Storage and Handling: Normal Use: Steps to be taken in case of leaks and spills: Handle abrasive cutting off wheels and grinding wheels carefully to prevent damage from shock, heat, etc. Store in dry protected area free from humidity, freezing temperatures or extreme temperature changes. Consult ANSI B.1: Safety Requirements for the Use, Care, and Protection of Abrasive Wheels. Use with adequate ventilation. See OSHA 29CFR 1910.
SECTION XI: TOXICOLOGICAL INFORMATION This product is considered a consumer product / finished product. No data is available regarding ingestion or other contact with the body toxicological level. *See Section III on risk identification for more information in case of normal use SECTION XII: ECOLOGICAL INFORMATION Ecotoxicity: The product is inert and presents no direct risk for aquatic and terrestrial life.