UK Ireland Australia New Zealand
Intended use Your Black & Decker Glue Gun has been designed for leisure and DIY activities in the home to join materials together including paper, card and material. This tool is intended for consumer use only. Safety instructions Warning! When using mains-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. X Read all of this manual carefully before using the appliance.
Keep the appliance away from all flammable material. Be aware that this product may ignite material. Where this is a concern, test a piece of scrap material. Never leave the appliance plugged in and unattended. After use, unplug the appliance, allow the attachment to cool and store in a safe place out of the reach of children. Fumes resulting from heating materials for craft activities may be hazardous. Always work in a well ventilated area. Seek advice on the materials being used.
X Use the wrench to rotate the glue tip attachment anti clockwise. Removing and changing attachments X Install the attachment and rotate it clockwise to tighten. X Fitting a glue stick X Replacement glue sticks are available from your Black & Decker dealer (cat. no. X72020-QZ) X Insert a stick of hot melt glue into the inlet tube located at the rear of the appliance. X Gently squeeze the trigger (1) to locate the glue stick firmly in position. Place the appliance into the stand (3) (Fig, A).
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
496011-00 10/06
