Instructions / Assembly

Operang Instrucons

- POWER

The POWER buon supplies power to all the funcons of the heater. Pressing the POWER buon the heat

seng lights will illuminate.

▲ ▼- SETTING TEMPERATURE

Allow the product to operate unl the ambient room temperature reaches the desired comfort level.

To adjust the thermostat, press ▲ buon to increase the temperature and press ▼ to decrease the temperature.

Use this funcon to help regulate the ambient temperature level.

NOTE: Aer the heater funcon or power is shuto the blower will connue to run for several minutes to cool the

internal components.

SAVE THESE INSTRUCTIONS

IMPORTANT INSTURCTIONS

23. See direcons in Figure 1. This heater is for use on 120 volts. The cord has a plug as shown in gure 1. See Figure 1

for grounding instrucon. An adapter as shown at C is available for connecng three-blade grounding type plugs to

two-slot receptacles. The green grounding plug extending from the adapter must be connected to a permanent

ground such as a properly gounnded outlet box. The adapter should not be used if a three-slot grounded receptacle

is available.

C D

Grounding Pin

Cover Of Grounded

Outlet Box

Metal

Screws

Adapter

Grounding

Means

Grounding

Fig.1