Instructions / Assembly

5
When the remote control stops operang or its range seems reduced, it is me to replace the baery with a new one.
1. The baery compartment is located on the back end of the remote.
2. Press and slide the baery door open and remove the old baery.
3. Insert 2pc AAA baeries, checking that the + and - sides of the baery match inside the baery compartment.
4. Replace the baery compartment door.
CAUTION:
• Always purchase the correct size and grade of baery most suitable for the intended use.
• Replace all baeries of a set at the same me.
• Clean the baery contacts and also those of the device prior to baery installaon.
• Ensure the baeries are installed correctly with regard to polarity (+ and -).
• Remove baeries from equipment which is not to be used for an extended period of me.
• Remove used baeries promptly.
Note: Do not mix old and new baeries.
Do not mix alkaline, standard (carbonzinc), or rechargeable (nicad, nimh, etc) baeries.
Cauon do not ingest baeries. If baeries are swallowed immediately call poison control.
Replacing the Remote Control Baeries
Remote Informaon
DISPOSAL OF USED BATTERIES
Baery may contain hazardous substances which could be endangering to enviroment and human
health.
This symbol marked on the baery and/or packaging indicates that used baery shall not be treated as
municipal waste. Instead it shall be le at the appropriate collecon point for recycling.
By ensuring the used baeries are disposed of correctly, you will help prevenng potenal negave
consequences for the environment and human health. The recycling of materials will help to converse
natural resources.
For more informaon about collecon and recycling of used baeries, please contact your local
municipality, your waste disposal service or the point of sale where you purchased this point.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio or television recepon, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operaon.
Modicaons not approved by the party responsible for compliance could void user’s authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Note: please operate remote transmier at a slow measured pace. Press the remote control buons with an even moon and
gentle pressure. Repeatedly pressing buons in rapid succession may cause the transmier to malfuncon.