Powerful Solutions 5 4 6 7 TM 3 2 1 www.blackanddecker.co.
English 2 (Original instructions) 5
13 8 9 B 4 11 9 10 C A 2 6 3 D E 3
7 7 F1 F2 12 7 F3 G1 12 G2 4 G3
Intended use Your Black & Decker compact screwdriver has been designed for screwdriving applications and for drilling in wood, metal, plastics and masonry. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Battery tool use and care a.
Do not store in locations where the temperature may exceed 40 °C. u Charge only at ambient temperatures between 10 °C and 40 °C. u Charge only using the charger provided with the appliance/tool. Using the wrong charger could result in an electric shock or overheating of the battery. u When disposing of batteries, follow the instructions given in the section "Protecting the environment". u Do not damage/deform the battery either by puncture or impact, as this may create a risk of injury and fire.
Fitting and removing a drill bit or a screwdriver bit (fig. C) This tool uses screwdriver bits and drill bits with a 6.35 mm (1/4") hexagonal shank. u To fit a bit, insert the bit shaft into the bit holder (4). u To remove a bit, pull the bit shaft out of the bit holder (4). Residual risks. Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc.
LED light u The LED light (5) is activated automatically when the trigger is depressed. The LED will also illuminate when the trigger is depressed and the forward/reverse slider (2) is in the locked off position (central position). Accessories Hints for optimum use Screwdriving u Always use the correct type and size of screwdriver bit. u If screws are difficult to tighten, try applying a small amount of washing liquid or soap as a lubricant.
z Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
TYP. H1 AS36LN Partial support - Only parts shown available Nur die aufgefuerten teile sind lieferbar Reparation partielle - Seules les pieces indiquees sont disponibles Supporto parziale - Sono disponibili soltanto le parti evidenziate Solo estan disponibles las peizas listadas So se encontram disponiveis as pecas listadas Gedeeltelijke ondersteuning - alleen de getoonde onderdelen zijn beschikbaar 1 2 E15386 12 www.2helpU.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90557368 REV-1 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.
