User Manual

ManualsBrandsBLACK + DECKER ManualsAir Conditioners & AccessoriesBLACK + DECKER BAB-2438 Window Air Conditioner Support Bracket Grey

INSTRUCTION MANUAL

WINDOW AIR CONDITIONER

SUPPORT BRACKET

Thank you for choosing BLACK+DECKER!

PLEASE READ BEFORE RETURNING THIS PRODUCT FOR

ANY REASON.

If you have a question or experience a problem with your BLACK+DECKER

purchase, go to www.blackanddecker.com/instantanswers

If you can’t find the answer or do not have access to the Internet, call

844-299-0879 from 10:30 a.m. to 6:30 p.m. EST Mon. - Fri. to speak with an

agent. Please have the catalog number available when you call.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

CATALOG NUMBER

BAB-2438

Requires No Drilling, Tools,

Fasteners or Hardware

(For Single, Double Hung Windows Only. Sizes 24”-38” wide.)

Summary of content (8 pages)

PAGE 1
WINDOW AIR CONDITIONER SUPPORT BRACKET INSTRUCTION MANUAL CATALOG NUMBER BAB-2438 (For Single, Double Hung Windows Only. Sizes 24”-38” wide.) Requires No Drilling, Tools, Fasteners or Hardware Thank you for choosing BLACK+DECKER! PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON. If you have a question or experience a problem with your BLACK+DECKER purchase, go to www.blackanddecker.
PAGE 2
SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS 1. Read the enclosed instructions to ensure the safe and proper method of installing the BLACK+DECKER A/C Bracket. 2. Make sure the width of the window is no less than 24” and no greater than 38”. 3. Install the A/C Bracket from inside. 4. Not for use on dormers. Ensure there is 10” of clearance below window. 5. Do not fully lean out of window. 6. Do not overload the A/C Bracket in excess of its maximum capacity of 200 lbs. 7.
PAGE 3
SET UP & USE STEP 1 Place bracket upside down. Attach Legs: Slide leg into support rail while pressing BOTH spring buttons. Release button so that it extends out from the inner or outer hole of support rail. Repeat for second leg. It’s advisable to initially use the third hole. NOTE: T he spring button will only lock into an inner or outer hole (Not both). When adjusting the legs, the buttons will alternate and snap into only one hole at a time (Inside or outside).
PAGE 4
SET UP & USE STEP 2 Prepare Sill Stop Wings: Slide wings (left and right) onto frame as shown in diagram. Left Wing Right Wing Lock pins pull out to release and push in to lock into slotted holes.
PAGE 5
SET UP & USE STEP 3 Place in window: Rest bracket on the bottom sill. Adjust each Sill Stop Wing outward until the steel tabs are securely positioned against the front OUTER WINDOW FRAME. THIS IS MANDATORY FOR PROPER SUPPORT OF A/C. TO ENSURE PROPER DRAINAGE, THE TOPSHELF A/C BRACKET SHOULD BE INSTALLED WITH A SLIGHT TILT ABOUT 1/4” to 1/2” DOWNWARD TOWARD THE OUTSIDE. MAKE SURE THE FOOT PADS ARE RESTING ON A FLAT, STABLE SURFACE.
PAGE 6
SET UP & USE OPTIONAL CLIP INSTALLATION POWER Auto High Med Low 72 Cool Energy Saver Fan Only To ensure a proper ﬁt, place one clip on the bottom of each side curtain and attach to the left and right wings to help secure side curtains in place.
PAGE 7
TROUBLESHOOTING & WARRANTY LIMITED WARRANTY Any repair, replacement, or warranty service, and all questions about this product should be directed to W Appliance Co. at 844-299-0879 from the USA or Puerto Rico. W Appliance Co. warrants to the original purchaser that the product will be free from defects in material, parts and workmanship for the period designated for this product.
PAGE 8
BLACK & DECKER, BLACK+DECKER, the BLACK & DECKER and BLACK+DECKER logos and product names and the orange and black color scheme are trademarks of The Black & Decker Corporation, used under license. All rights reserved. Product in this box may differ slightly from that pictured. Does not affect function. Not all accessories shown in photography are included in this package. Imported by W Appliance, Inc.