Use and Care Manual

Page 13
SET UP & USE
IF AC IS BLOCKED BY STORM
WINDOW
Add wood as shown in Fig.12 or remove
storm window before air conditioner is
installed. If Storm Window Frame must
remain, be sure the drain holes or slots are
not caulked or painted shut. Accumulated
Rain Water or Condensation must be
allowed to drain out.
REMOVING AC FROM WINDOW
Turn AC off and disconnect power cord.
Remove sash seal from between windows
and unscrew safety sash lock. Remove
screws installed through frame and frame
lock. With 2 people, keeping a firm grip on
air conditioner, raise sash and carefully
remove. Be carefully not to spill any remaining
water while lifting unit from window.
Store parts WITH air conditioner.
Fig. 12
INSTALL WEATHER STRIPPING
(only be applicable to Energy star models)
In order to minimize air leaks between
the room air conditioner and the window
opening, trim the weather stripping with
a proper length, peel off the protective
backing and plug any gaps if needed
(Fig.11).
Fig. 11