www.blackanddecker.co.
14 12 15 11 12 13 B A 6 17 4 11 C 20 16 D 20 10 18 19 18 20 E 2 21 10 F
21 22 8 7 G 8 H 3
Intended use Your Black & Decker jigsaw has been designed for sawing wood, plastics and sheet metal. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Battery tool use and care a.
Labels on tool : The following pictograms are shown on the tool: Warning! To reduce the risk of injury, the user must read the instruction manual. Electrical safety # Additional safety instructions for batteries and chargers Batteries Never attempt to open for any reason. Do not expose the battery to water. Do not store in locations where the temperature may exceed 40 °C. Charge only at ambient temperatures between 10 °C and 40 °C. Charge only using the charger provided with the tool.
Connecting a vacuum cleaner to the tool (fig. E & F) Align the dust extraction adaptor (10) with the saw shoe as shown. Insert the ribs (18) into the slots (19). Rotate the adaptor until it locks into position. Make sure that the ribs (20) are correctly seated. Connect the vacuum cleaner hose (21) (not supplied) to the adaptor. Dust extraction is not possible when making bevel cuts. Use Warning! Let the tool work at its own pace. Do not overload.
Hints for optimum use Sawing laminates As the saw blade cuts on the upward stroke, splintering may occur on the surface closest to the shoe plate. Use a fine-tooth saw blade. Saw from the back surface of the workpiece. To minimise splintering, clamp a piece of scrap wood or hardboard to both sides of the workpiece and saw through this sandwich. Sawing metal Be aware that sawing metal takes much more time than sawing wood. Use a saw blade suitable for sawing metal.
Battery Voltage Capacity Battery type Weight A18 A18NM VDC 18 18 Ah 1.5/1.2 1.5 NiCd NiMH kg 0.825/0.75 0.9 Charger Input voltage Approx. charging time Weight 3 hour VAC 230 h 3 kg 0.4 A1718 18 1.7 NiCd 0.9 1 hour 230 1 0.4 EC declaration of conformity BD1800JS Black & Decker declares that these products conform to: 98/37/EC, EN 60745 Level of sound pressure according to EN 60745: Sound pressure (LpA) 82.7 dB(A), uncertainty (K) 3 dB(A) Acoustic power (LWA) 93.
TYP. BD1800JS 1 Partial support - Only parts shown available Nur die aufgefuerten teile sind lieferbar Reparation partielle - Seules les pieces indiquees sont disponibles Supporto parziale - Sono disponibili soltanto le parti evidenziate Solo estan disponibles las peizas listadas So se encontram disponiveis as pecas listadas Gedeeltelijke ondersteuning - alleen de getoonde onderdelen zijn beschikbaar 1 5 2 4 3 E15390 www.2helpU.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90533886 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.
