model
IMPORTANT SAFETY INSTRUCTION SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
DO NOT use the vacuum cleaner with blocked filters. Clean or replace filters before continuing. (refer to User Maintenance section). DO NOT use the vacuum cleaner if the appliance malfunctions, abnormal noise, smell, smoke, is dropped or damaged in any manner or any breakage is found during operation. DO turn off controls before you connect or disconnect the appliance to or from the mains supply.
IMPORTANT SAFETY INSTRUCTION CONT. READ AND SAVE THESE INSTRUCTIONS Symbols • The label on your tool may include the following symbols. The symbols and their definitions are as follows: V....................volts A.....................amperes Hz...................hertz W....................watts min .................minutes or AC.........alternating current or DC ....direct current no ...................no load speed .................Class I Construction ...................earthing terminal (grounded) .....
Product View 13 1 2 12 3 4 11 10 7 5 9 6 1. Handle 2. Dust cup release 3. Dust cup 4. Handle hose 5. Power on/off 6. Nozzle 7. Air outlet 8 8. Wheel 9. Connecting hose 10. 2-in-1 crevice tool accessory 11. Power cord 12. Power cord wrap 13. Turbo Pet Tool accessory The pet hair cleaning tool (13) is for use when vacuuming pet hair and/or ground-in debris from carpeted or upholstery surfaces. WARNING: Injury to pets. Do not use pet hair cleaning tool directly on animals.
Assembly Please Note: Always remove the plug from the power socket before fitting or removing accessories. Ensure all Filters are fitted, and fitted correctly before using. WARNING: DO NOT plug in your vacuum cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operation procedures. 2 1 3 2 1 Remove the dust cup before installing handle. Insert the handle into the vacuum body, then rotate the screw into body as shown.
Operation 2 1 Twist the quick release cord hook to release the power cord. Step on the brush cover and pull back on handle, to engage for operation. Plug in your machine and push ON/OFF button to switch ON/OFF. To maintain optimal performance,please emtpy dust cup when debris reaches MAX FILL line.
Operation The handle hose can be used immediately. At the same time, you can insert the 2-in-1 crevice tool into the hose handle to extend the distance. Remove hose handle and 2-in-1 crevice tool accessory from the machine. Accessories 1 2 2-in-1 Crevice Tool Accessory The 2-in-1 crevice tool with brush allows for vacuuming in narrow and hard-to-reach places. TURBO Pet Tool For vacuuming pet hair of all surface.
Maintenance And Care - Emptying WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Emptying and cleaning the dust cup Press dust cup release button to remove the dust cup. Hold dust cup over garbage bin and unclip the lock on the bottom of the cup, allowing the dust to empty. Close the base of the dust cup, align the cup base back onto the machine and push until it clicks back into place.
Maintenance And Care - Cleaning Dust Cup Filter WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. 1. Remove the dust cup. 2. Open the dust cup filter lid, located on the top of the cup. 3. Remove the dust cup foam filter. 4. Hand wash the foam filter. 5. Allow filter to dry 24 hours before putting back into vacuum cleaner. 6. Push the release button, open the dust cup and clean all parts of the dust cup. DO NOT operate without filter installed.
Maintenance And Care - Cleaning Brush Roll WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Carefully remove any string, hair or debris located on the brush roll. You can use a tool such as a small knife or scissors to remove and cut any hair or string. Maintenance And Care - Cleaning Pet Tool WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. UNLOCK LOCK 1.
Maintenance And Care - Cleaning Vacuum And Tools Do not clean the vacuum cleaner, components or accessories using petrol or any other flammable liquid or solvents, etc. Clean only the outside of the vacuum cleaner. Use only a moist cloth and mild detergent for cleaning the vacuum cleaner, components and accessories. After cleaning, wipe off the moisture on vacuum cleaner, components and accessories with a dry cloth. Do Not place accessories, tools or components in a dishwasher.
Maintenance And Care - Replace Brush Roll WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. You should check your cleaner’s brush roll and drive belt regularly for wear or damage. You should also clean the brush and brush ends by removing string, hair and carpet fibers. These can wrap around the brush and hamper its ability to effectively clean your carpet. Also remove any debris that has accumulated under the brush cover. 1.
Troubleshooting WARNING: To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting to the vacuum cleaner. Vacuum cleaner won’t run: Possible causes Remedies 1. Vacuum cleaner is not plugged in 2. Blown fuse/tripped breaker Vacuum cleaner won’t pick up dirt: Possible causes 1. Check electrical plug 2. Check/replace fuse or reset breaker 1. Dust cup is full 2. Filter is dirty 3. Hose not secure 1. Empty dust cup 2.
WARRANTY ONE-YEAR LIMITED WARRANTY Black & Decker (U.S.) Inc. warranties this product to be free from defects in material or workmanship for a period of one (1) year following the date of purchase, provided that the product is used in a home environment. This limited warranty does not cover failures due to abuse, accidental damage or when repairs have been made or attempted by anyone other than BLACK+DECKER authorized service agent.
