Installation Guide

ManualsBrandsBLACK+DECKER ManualsTools & Hardware20-Volt Max Lithium-Ion Drill/Driver with Autosense Technology

heard (figure B). Ensure battery pack is

fully seated and fully latched into position.

epress



figure C and pull battery pack out of tool.

OPERATING INSTRUCTIONS

TRIGGER SWITCH & REVERSING

BUTTON (FIGURE D)

 





the speed of the drill.

 

determines the direction of the tool and

also serves as a lock off button.

 

switch and depress the forward/reverse

control button to the left.

 

reverse control button the opposite

direction.

NOTE: The center position of the control

button locks the tool in the off position.

When changing the position of the control



DRILL / DRIVE MODE SELECT (FIGURE E)

This drill is equiped with mode select



the performance of the tool to drilling or

driving based upon your project.

 

button marked with the

symbol.

 

button marked with the

symbol.

NOTE: A blue LED will light the symbol for

the mode that is selected.

STATE OF CHARGE INDICATOR

(FIGURE E)

The drill is equipped with a state of charge

indicator. This can be used to display the current

level of charge in the battery during use. It does

not indicate tool functionality and is subject





Checking state of charge during use:



shown in Figure B.







the percent of charge in the battery. If all four





NOTE: The state of charge LEDs will also

light when the trigger is pulled to indicate

the state of charge while the drill is in use.

SINGLE SLEEVE KEYLESS CHUCK

(FIGURE F)

WARNING: Make certain the lock-off

button is engaged to prevent switch actuation

before installing or removing accessories.

To insert a drill bit or other accessory:

1. Grasp the handle of the drill with one

hand and use your other hand to rotate