Manual

andyoumayhaveotherrightswhichvary
fromstatetostateorprovincetoprovince.
Shouldyouhaveanyquestions,contact
themanagerofyournearestBlack+Decker
ServiceCenter.Thisproductisnotintended
forcommercialuse.
FREEWARNINGLABEL REPLACEMENT:
If your warning labels become illegible or
are missing, call 1-800-544-6986 for a free
replacement.
LATIN AMERICA: This warranty does not
apply to products sold in Latin America. For
products sold in Latin America, check country
specific warranty information contained in the
packaging, call the local company or see the
website for warranty information.
Problem
• AUTOSENSE Technology
doesn't work or stops
prematurely.
• Unitwill not start.
• Battery pack willnot
charge.
• Unit shutsoff abruptly.
TROUBLESHOOTING
Possible Cause
•AUTOSENSE Technology
disengaged
•Tool in drill mode.
• Not enough pressure
when driving.
• Battery pack not installed
properly.
• Batterypack notcharged.
• Battery pack not inserted
intocharger.
• Charger not plugged in.
•Surrounding airtemperature
too hot or too cold.
• Battery pack has reached its
maximum thermal limit.
• Outof charge. (To
maximize the lifeof the
battery pack itis designed
to shutoff abruptly when
the charge is depleted.)
Possible Solution
• Release the trigger and
depress it again to
reactivate the
AUTOSENSE technology.
• Ensure toot is in
screwdriver mode as
described in "Drill / Drive
Mode Select."
• Try again and apply
a substantial amount of
pressure to the back of
the toot.
• Check battery pack
installation.
• Check battery pack
charging requirements.
• Insertbattery pack into
charger until green LED
appears.
• Plugcharger intoa
working outtet.Refer to
"Important Charging
Notes"for more details.
• Movecharger and battery
packto a surrounding air
temperature Ofoabove 40
degrees F (4.5 C) or below
105 degrees F (+40.5°C).
•Allow battery packto
cool down.
• Placeon charger and
allow to charge.
For assistance with your product, visit our website www.blackanddecker.com for the location
of the service center nearest you or call the BLACK+DECKER help line at 1-800-544-6986
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
10