Warranty Guide

10
Service Information
AllBLACK+DECKERServiceCentersarestaffedwithtrainedpersonneltoprovide
customerswithefficientandreliablepowertoolservice.Whetheryouneedtechnical
advice,repair,orgenuinefactoryreplacementparts,contacttheBLACK+DECKER
location nearest you. To find your local service location visit www.blackanddecker.com
The RBRC™ Seal
TheRBRC™(RechargeableBatteryRecyclingCorporation)Sealonthe
lithium-ion battery (or battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have already been paid
by BLACK+DECKER . In some areas, it is illegal to place spent lithium-ion
batteriesinthetrashormunicipalsolidwastestreamandtheRBRCprogram
provides an environmentally conscious alternative.
RBRCincooperationwith BLACK+DECKER and other battery users, has established
programs in the United States and Canada to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and conserve natural resources by returning the tool to
an authorized BLACK+DECKER service center for recycling. You may also contact your local
recycling center for information on where to drop off the spent battery, or call 1-800-8-BATTERY.
Maintenance
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Accessories
WARNING: The use of any accessory not recommended for use with this tool could
be hazardous.
Recommended accessories for use with your tool are available from your local dealer
or authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
Bdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedto
TROUBLESHOOTING
Problem Possible Cause Possible Solution
•Unitwillnotstart.  •Batterypacknotinstalledproperly. •Checkbatterypack
installation.
    •Batterypacknotcharged.  •Checkbatterypack
charging requirements.
•Unitstartsimmediately •Theswitchhasbeen  •Theswitchmustbemoved
upon inserting battery. left in the “on” position. to “off” to prevent the tool
from immediately starting
when battery is inserted
•Batterypackwillnotcharge. •Batterypacknotinsertedintocharger. •Insertbatterypackinto
charger until LED lights.
   •Chargernotpluggedtin.  •Plugchargerintoa
working outlet. Refer to
“Important Charging Notes”
for more details.
    •Surroundingairtemperature•Movechargerandbattery 
too hot or too cold. pack to a surrounding air
temperature of above 40
degrees F (4,5°C) or below
105 degrees F (+40,5°C).
•Unitshutsoffabruptly. •Batterypackhasreachedits•Allowbatterypacktocool
maximum thermal limit. down.
    •Outofcharge.(To •Placeonchargerand
maximize the life of the allow to charge.
battery pack it is designed
to shutoff abruptly when
the charge is depleted.)
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK+DECKER help line at
1-800-544-6986.