SAFETY GUIDELINES DEFINITIONS 1t s important for you o read end understand this manual. The information & contains slates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below afe used o help ol recognize this information. A DANGER: indicates an imminently hazardous situation which, if not avoided, will resell in descend or serious injury. A WARNING: indicates a potentially hazardous situation which, nat avoided, could resell In death or serious bury.
OPERATING INSTRUCTIONS WARNING: Before attempting unruly of the following operations, make sure that the tool off and unplugged and that the saw blade has stopped. Used saw biased can 3 INSTALLING A BLADE This jig saw a s both T shank and universal blades * To install & blade (4) in the fig saw, push upward on the blade locking lever (3} (Fig. A). © With teeth facing forward, Insert the shank of the saw blade Imo the blade holder as far as it will go.
SWITCHING ON AND OFF + To switch the ol on, squeeze the Wigner switch (1) ~ For continuous operation, squeezes the rigger switch then depress the lock-on bunion (8) Ores lock-on bunion is depressed, release the trigger switch. » Te switch the tool off, release the trigger switch. 1o switch the tool off, when in continuous operation, squeeze the trigger and the lock will disengage.
