KS890GT
Congratulations! On the purchase of your Black & Decker saw. To ensure the best results from your saw please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual).
Contents Page 4 Safety instructions Double insulation Page 5 Electrical safety Mains plug replacement Extension cables Unwanted tools and the environment The Black & Decker guarantee Page 6 Accessories Technical data Features Removal & refitting the blade Page 7 Removing the blade Fitting a blade Operating your Scorpion Saw Recommended Materials Page 8 Cleaning EC declaration of conformity Page 12 Black & Decker phone numbers and addresses
Scorpion Saw user manual SAFETY INSTRUCTIONS Warning! When using electric tools, the following basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Read all these instructions before attempting to operate the product and save this booklet. For safe operation: • Keep the work area clean. Cluttered areas and benches invite injuries. • Consider the work area environment. Do not expose the power tool to rain and do not use in damp or wet locations.
ENGLISH Note: Double insulation does not take the place of normal safety precautions when operating the tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. ELECTRICAL SAFETY Be sure the supply is the same as the voltage given on the rating plate. The tool is fitted with a two-core cable and plug.
ENGLISH If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless: • The product has been used for trade, professional or hire purposes; • The product has been subjected to misuse or neglect; • The product has sustained damage through for
ENGLISH Always ensure the unit is unplugged from the power supply when changing blades. Always ensure the tooth protector is fitted when changing blades. REMOVING THE BLADE Ensure blade has cooled after use. Press and hold the rear of the blade release button fully, hold the back of the blade and rotate the blade through 90° as shown in the diagram. Slide the blade sideways off the retaining pin and remove from the saw. FITTING A BLADE Place the blade with the tooth protector fitted over the location pin.
ENGLISH RECOMMENDED MATERIALS Recommended materials Capacity Large capacity blade Soft wood Plastic soil pipe Up to 100mm x 100mm Up to 125mm Ø Curve cutting blade Worktop Up to 50mm Metal cutting blade Ferrous/non-ferrous metals Up to 3mm thick CLEANING Disconnect your Scorpion Saw from the power supply. Use only mild soap and a slightly damp cloth to clean your Scorpion Saw. Many household cleaners contain chemicals which could seriously damage the plastic and gel components.
TYP. 1 KS890GT 139 129 140 143 130 144 147 131 149 150 131 148 103 141 142 125 126 127 128 120 121 122 123 132 124 102 132 101 133 138 104 105 106 108 107 110 118 111 108 109 112 114 113 115 E13585 www.2helpu.
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker 81 Hugo Johnston Drive Penrose, Auckland, New Zealand United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD Part No: 584587-00 Tel. 09 579 7600 Fax 09 579 8200 Tel.