www.blackanddecker.co.
English 2 (Original instructions) 0
15 13 14 8 B A 7 6 16 C D 23 18 17 17 19 21 23 21 10 E F 3
20 23 20 23 23 23 22 20 10 G H 23 I 4 23 22 J
Intended use Your Black & Decker trimmer has been designed for trimming and finishing lawn edges and to cut grass in confined spaces. This appliance is intended for consumer use only. Safety instructions Warning! When using mains-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. u Read all of this manual carefully before operating the appliance.
u u u u u u u u u u u u Never touch the cutting line while the appliance is running. Do not put the appliance down until the cutting line has come to a complete standstill. Use only the appropriate type of cutting line. Never use metal cutting line or fishing line. Be careful not to touch the line trimming blade. Take care to keep the mains cable away from the cutting line. Always be aware of the position of the cable.
Edging mode (fig. C & D) For edging, the trimmer head should be in the position shown in fig. C. If it is not: u Depress the adjustment button (6). u Rotate the tube (7), while releasing the button. u When the head is in position, the button will lock into place. Note: The tube will only rotate in one direction. Adjusting the height of the appliance (fig. D) This appliance has a telescopic mechanism, allowing you to set it to a comfortable height. There are three height settings.
Troubleshooting If your tool seems not to operate properly, follow the instructions below. If this does not solve the problem, please contact your local Black & Decker repair agent. Warning! Before proceeding, unplug the tool. Appliance runs slowly u u Check that the spool housing can rotate freely. Carefully clean it if necessary. Check that the cutting line does not protrude more than 11 cm from the spool housing. If it does, cut it off so that it just reaches the line trimming blade.
EC declaration of conformity % MACHINERY DIRECTIVE OUTDOOR NOISE DIRECTIVE GL701/GL710/GL716/GL720/GL741 Black & Decker declares that these products described under "technical data" are in compliance with: 98/37/EC (until Dec. 28, 2009), 2006/42/EC (from Dec. 29, 2009), EN 60335-1, EN 60335-2-91 2000/14/EC, Lawn Mower, L ≤ 50 cm, Annex VIII KEMA Quality B.V., Utrechtseweg 310, 6802 ED Arnhem, The Netherlands Notified Body ID No.
GL701 - GL710 - GL716 - GL720 - GL741 Partial support - Only parts shown available Nur die aufgefuerten teile sind lieferbar Reparation partielle - Seules les pieces indiquees sont disponibles Supporto parziale - Sono disponibili soltanto le parti evidenziate Solo estan disponibles las peizas listadas So se encontram disponiveis as pecas listadas Gedeeltelijke ondersteuning - alleen de getoonde onderdelen zijn beschikbaar 2 1 5 6 3 4 7 12 9 8 14 13 11 15 10 16 800 17 18 E15496 10 www.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90552981 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.