User's Manual

See ʻTools-Electricʼ

– Yellow Pages –

for Service & Sales

Imported by

Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286 U.S.A.

TROUBLESHOOTING

Problem Possible Cause Possible Solution

• Slow running, noisy or hot blades. • Dry, corroded blades. • Lubricate blades.

• Blades or blade support bent. • Straighten blade or blade support.

• Bent or damaged teeth. • Straighten teeth.

• Loose blade bolts. • Tighten blade bolts.

• Unit will not start. • Lock off not fully operated. • Check that lock off is fully pulled back prior to

moving main trigger.

• Cord not plugged in. • Plug cord into a working outlet.

• Circuit fuse is blown. • Replace circuit fuse. (If the product repeatedly

causes the circuit fuse to blow, discontinue use

immediately and have it serviced at a Black &

Decker service center or authorized servicer.)

• Circuit breaker is tripped. • Reset circuit breaker. (If the product repeatedly

causes the circuit breaker to trip, discontinue use

immediately and have it serviced at a

Black & Decker service center or authorized

servicer.)

• Cord or switch is damaged. • Have cord or switch replaced at Black

& Decker Service Center or Authorized Servicer.

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the

BLACK & DECKER help line at

1-800-544-6986.