Operation Manual

Screwdriving or nutsetting (fig. A)
• Select the appropriate bit for the screw (or nut) to
be driven.
• Select forward or reverse rotation as described
above.
• For nutsetting (BS20EK/BS25EK) always use the
correct depth locator (5).
• To run the tool, press the variable speed switch (1).
The pressure exerted on the variable speed switch
determines the tool speed.
• If necessary, press the lock-on button (2) for
continuous operation and release the variable
speed switch. The lock-on button works only in
full speed, forward and reverse rotation.
• To stop the tool, release the switch.
• To stop the tool in continuous operation, press
the switch briefly and releaseit. Always switch
OFF the tool when work is finished and before
unplugging.
Holding the tool (fig. F)
• For best results, hold the screwdriver with the
hand directly in line with the fastener and press
the variable speed switch with the last one or two
fingers of the hand, as shown. This reduces the
chance of the screw slipping from the drive
accessory when pressure is applied.
• To drive the screw, place it on the bit or into the
socket, press the variable speed switch and
push the screw into the workpiece with a
smooth, continuous motion. When the screw is
seated, a buzzing sound will come from the front
of the tool to indicate that the clutch has
disengaged.
Various types of 1/4" hex. bits, holders, sockets and
adaptors are available as an option.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your Elu Power Tool has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
BS40EK/BS40EKN
• Regularly remove drywall dust from the clutch
housing using compressed air. To do so, remove
the depth locator and adjustment collar.
Unwanted tools and the environment
Take your tool to an Elu authorized repair agent
where it will be disposed of in an environmentally
safe way.
Elu After-Sales service
All Elu Power Tools are thoroughly tested before
leaving the factory. However, if the Power Tool
needs repair, please contact your dealer or the Elu
Head Office for the address of the nearest Elu
authorized repair agent (please refer to the back of
this manual).
ENGLISH
en - 6 19