Operation Manual

13
ENGLISH
(Original instructions)
EN
10 TROUBLESHOOTING
Problems Probable causes Remedies
The appliance does not switch on
No electrical power
Check that the plug is firmly in the socket and that the mains
voltage supply is present (*)
Problems with the electric-electronic circuit Contact the Service Centre
The appliance does not suck in
material, or sucks only weakly
Accessories fouled Check and clean the nozzles, extensions or hoses
Filters dirty Clean the filters
Filter bags full Empty / change filter bags
Tank full Empty the tank
Power tool does not start (where power
tool socket is featured)
Power tool plug not fitted into vacuum cleaner socket correctly Fit the plug properly
Switch off or turned to I Turn switch to power tool/II position
Dust comes out of appliance
Filter not fitted Fit the filter
Filter damaged Replace the worn filter with a new one
Hose or connections damaged Replace damaged parts
Bad smells from appliance when in
operation
Filters/ filter bags dirty Replace filters/filter bags
(*) If the motor stops and does not restart during operation contact the Service Centre.
EC Declaration of conformity
We, Annovi Reverberi S.p.A, of Bomporto (Modena), Italy, declare that the following Black+Decker appliance(s):
Designation of appliance: Wet&dry vacuum cleaner
BXVC20PE BXVC20XE BXVC30PDE BXVC30XDE
Model No.: BXVC15PE BXVC20PTE BXVC20XTE BXVC25PDE BXVC30PTDE BXVC30XTDE
Rated power: 1.2 kW 1.2 kW 1.4 kW 1.2 kW 1.6 kW 1.6 kW
is (are) compliant with the following European directives: 2006/95/EC, 2004/108/EC, 2011/65/EU, 2005/32/EC, 2012/19/EU.
and was (were) produced in compliance with the following norms or standardised documents:
EN 60335-1; EN 60335-2-2; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 62233; EN 50581; Reg.1275/2008.
Name and address of the person responsible for issuing the technical file: Stefano Reverberi / AR Managing Director
Via ML King, 3 - 41122 Modena, Italy
Date: 10.01.2016
MODENA (I)
Stefano Reverberi Managing Director