Please Read and Save this Use and Care Book Por favor lea este instructivo antes de usar el producto † ™ UNDER-THE-CABINET MINI FOOD PROCESSOR / GRINDER MINI PROCESADOR / MOLINO PARA INSTALAR DEBAJO DEL GABINETE Register your product online at www.prodprotect.com/applica, for a chance to WIN $100,000! For US residents only Registre su producto por Internet en www.prodprotect.com/applica y tendrá la oportunidad de GANAR $100,000! Solamente para residentes de EE.UU USA/Canada 1-800-231-9786 www.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: ❑ Read all instructions. ❑ To protect against risk of electrical shock do not put cord, plugs or appliance in water or other liquid. ❑ Close supervision is necessary when any appliance is used by or near children. ❑ Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. ❑ Avoid contacting moving parts.
POLARIZED PLUG (120V Models Only) This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. Product may vary slightly from what is illustrated.
B A C A2 † 1. Mounting Parts (Part # SDC-MOUNTING KIT) A. 16 Spacers 4 ½" 4 ¼" 4 3/16" 4 1/16" B. 12 Screws 4 1" 4 1½" 4 2¼" C. 4 Washers 2. Mounting Template (in box) You will also need: • Tape • Ruler (or you may cut out the ruler provided on the template) • Electric drill with a ¼” drill bit GETTING STARTED • Remove all packing material, labels and any stickers. • Remove and save literature.
3. With cabinet doors open, place mounting template flush against the surface of the underside of your cabinet, making sure to align thick line on template with bottom front edge of your cabinet (D). Note: To determine which screws to use, you must have enough of the screw exposed underneath the cabinet to properly thread the screw into the nut. 11. Screwing from inside the cabinet down into appliance holes, tighten 4 screws in place to secure appliance to cabinet.
4. After measuring the overhang molding thickness as shown in Illustration G, look at the dashed lines on the mounting template; each line has a measurement next to it that indicates the thickness of the overhang molding used with that line. For example, if your cabinet has an overhang molding thickness of ½”, you will use the ½” dashed line on the template. 5. Fold the template along the dashed line that matches the thickness of your overhang molding. 6.
How to Use This appliance is for household use only. GETTING STARTED 1. For warranty verification, do not remove line cord tag. 2. Please go to www.prodprotect.com/applica to register your warranty. 3. Wash the coffee grinding bowl, mini food processor workbowl and blades for both in hot soapy water, rinse and dry thoroughly as directed in the CARE AND CLEANING section of this Use & Care manual.
Grind time and yield: AMOUNT GRIND SUGGESTED TIME ¼ cup (23 grams) Coarse 8 seconds Medium 9 seconds Fine 10 seconds Extra Fine 11 seconds Coarse 9 seconds Medium 10 seconds Fine 13 seconds Extra Fine 15 seconds Coarse 10 seconds Medium 11 seconds Fine 15 seconds Extra Fine 17 seconds Coarse 12 seconds Medium 17 seconds Fine 27 seconds Extra Fine 30 seconds 1 /3 cup (31 grams) ½ cup (47 grams) ¾ cup (70 grams) GROUND COFFEE TIPS • For a cup of rich, full flavored coff
Hold the workbowl securely and turn it counterclockwise to the UNLOCK position and keeping the bowl level, lower it from the appliance. 10. With your fingers on the top of the stem of the chopping blade, lift it up and out of the workbowl with a twisting motion. Remove food using rubber spatula or simply invert workbowl onto plate, bowl or work surface. 11. Unplug appliance when not in use. HELPFUL TIPS FOR CHOPPING AND BLENDING 9. • • • • The processor works very quickly.
PROBLEM POSSIBLE CAUSE SOLUTION Food is unevenly Food may be over chopped or is processed. watery. Use brief pulsing actions; wait for blades to stop and check the size of the processed food. Food catches on There may be too much blade. food in the workbowl. Remove workbowl from appliance; carefully remove blade and empty workbowl. Replace blade as directed above and reduce the amount of food in the workbowl.
❑ Verifique que la tapa esté bien asegurada antes de operar el aparato. ❑ No trate de anular el mecanismo de enclavamiento de la tapa. ❑ No permita que el cable entre en contacto con ninguna superficie caliente, incluyendo la estufa. ❑ Antes de usar, verifique que no haya ningún objeto ajeno adentro de la tolva. ❑ Para evitar el riesgo de incendio o choque eléctrico, no opere ningún artefacto de calefacción debajo del montaje de este aparato.
El producto puede variar ligeramente del que aparece ilustrado. B A A1 1. Aparato instalado †2. Tazón para moler (Pieza Nº CG800-01) †3. Cuchilla moledora de acero inoxidable (Pieza Nº CG800-02) 4. Botón de control de encendido/apagado †5. Tazón mezclador para el procesado (Pieza Nº CG800-03) †6. Cuchilla picadora de acero inoxidable (Pieza Nº CG800-04) †7. Tapa para almacenamiento (Pieza Nº CG800-05) 8. Compartimiento para el cable (no mostrado) 9.
PASOS PRELIMINARES • Retire todo el material de empaque, etiquetas y calcomanías. • Retire y conserve toda literatura. • Desempaque las partes de montaje, y apártelos en un lugar seguro para no perderlos. Importante: No trate de operar el aparato sin antes haberlo instalado debidamente. ESCOJA EL LUGAR ADECUADO Cuando escoja un lugar de montaje, tome en cuenta lo siguiente: • ASEGÚRESE de instalar el abrelatas con alcance a una toma de corriente. • TOME EN CUENTA su patrón normal de trabajo en la cocina.
Nota: Para determinar que tornillos debe usar, tenga en cuenta que cada tornillo debe sobresalirse del gabinete lo suficiente para que pueda asegurarse con una tuerca. 11. Use el destornillador desde adentro del gabinete y apriete los 4 tornillos para asegurar el aparato al gabinete. Nota: Siempre apriete los tornillos para asegurar que no haya vibración mientras el aparato está en funcionamiento. 12.
9. Una vez que haya perforado los agujeros, despegue la cinta adhesiva y la plantilla de montaje. 10. Limpie el polvo y el sucio del panel inferior del gabinete, por la parte de arriba y de abajo. 11. Por dentro del gabinete, coloque una arandela sobre cada uno de los 4 agujeros que ha perforado. 12. Mida la altura del saliente con una regla o con la regla de papel provista, colocándola verticalmente contra la parte de abajo del gabinete, detrás del saliente.
Como usar Este producto es para uso doméstico solamente. COMO COMENZAR 1. Para verificación de la garantía, no quite la etiqueta del cable principal. 2. Vaya a www.prodprotect.com/applica para registrar su garantía. 3. Lave el tazón para moler café, el tazón mezclador del mini procesador de alimentos y las cuchillas de ambos con agua caliente y jabón, enjuague y seque bien como se indica en la sección de Cuidado y Limpieza de este manual de Uso y Cuidado.
PAUTAS PARA MOLER Selección de la configuración para moler Método de preparación Tipo de molido Aspecto Cafetera de filtro o cafetera francesa Grueso Como granos de sal Cafetera eléctrica o cafetera por vacío Medio Como granos de arena Espresso Fino Como talco Turco Extra fino Como harina La molienda adecuada es importante para lograr el mejor sabor del café. Cuanto más rápido sea el proceso de preparación, más fino el molido.
4. Sosteniendo el tazón mezclador por su base introdúzcalo de modo seguro en el centro de la parte inferior de la cubierta del motor con la flecha del tazón directamente debajo de la marca UNLOCK que se encuentra en la parte inferior de la cubierta del motor (R). R 5. Gire el tazón mezclador en el sentido de las agujas del reloj hasta que calce en su posición. La marca LOCK de la cubierta debe estar alineada con la flecha del tazón mezclador.
DIAGNÓSTICO DE PROBLEMAS PROBLEMA PROBLEMA Los alimentos están picados de modo desparejo. El tazón mezclador está demasiado lleno. Los alimentos pueden estar cortados en tamaños diferentes. Desenchufe el aparato y quite parte de los alimentos del tazón mezclador. Las cantidades más pequeñas se procesarán de modo más parejo. Presione el botón ON/OFF en períodos de 5 segundos o incrementos menores.
NEED HELP? For service, repair or any questions regarding your appliance, call the appropriate 800 number on the cover of this book. Do not return the product to the place of purchase. Also, please Do not mail product back to the manufacturer, nor bring it to a service center. You may also want to consult the website listed on the cover of this manual.
† ™ Save space and regain your counters in any kitchen with our full-line of space-saving appliances. †SpaceMaker™ appliances can help tackle all your kitchen tasks while keeping your counters free of clutter! Visit www.bdspacemaker.com to learn more about †SpaceMaker™ appliances and see our latest promotional offers.