English 2 (Original instructions) 6
A2 A3 B 4 C
D E 5
Intended use Your Black & Decker garden shredder GS2400 has been designed for shredding most kitchen and garden waste, including prunings, hedge trimmings, twigs and other organic garden waste as well as paper and cardboard. The shredded waste is ideal for composting purposes or to obtain a smaller volume of waste for easy disposal. This garden shredder is intended for consumer use only. It is intended for intermittent use: the recommended material feed time is 40% of the total run time of the shredder.
u Your appliance is designed for use on AC (mains) electrical supplies only. Do not attempt to use it on any other supply. Extension cables u u When using the appliance outdoors, only use extension cables intended for outdoor use. Up to 25 m 1.5 mm 3-core extension cable can be used without loss of power. u Maintenance and storage u Mains supply The product meets the technical requirements of EN 61000-3-11.
Features 1. 2. 3. 4. 5. 6. 7. On/off switch Direction selector Overload protection button Funnel Stand Collection bag Adjustment knob Assembly Warning! Before assembly, make sure that the tool is switched off and unplugged. Assembling the stand (fig. A1 - A3) Warning! Seek assistance when fitting the stand. The appliance is too heavy to be handled by one person. u Turn the appliance upside down and place it on the floor. u Align the holes in the support legs with those in the appliance.
Maintenance Your Black & Decker appliance has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper appliance care and regular cleaning. u Keep the unit clean and dry. u Do not use any abrasive or solvent-based cleaner. u Regularly clean the ventilation slots in your appliance using a soft brush or dry cloth. Adjusting the cutter plate The cutter plate needs to be adjusted if the appliance fails to shred material.
EC declaration of conformity MACHINERY DIRECTIVE OUTDOOR NOISE DIRECTIVE % GS2400 Black & Decker declares that these products described under "technical data" are in compliance with: 2006/42/EC, EN 60335 2000/14/EC, Shredder, Annex V Level of sound power according to 2000/14/EC (Article 13): Sound pressure (LpA) 91 dB(A), uncertainty (K) 3 dB(A) Sound power (LWA) 93 dB(A), uncertainty (K) 3 dB(A) For more information, please contact Black & Decker at the following address or refer to the back of the manua
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90564121 REV-0 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.