www.blackanddecker.co.
English 2 (Original instructions) 4
8 3
Intended use Your Black & Decker Saw has been designed for sawing wood, plastics and metal. This tool is intended for consumer use only. Safety instructions General power tool safety warnings Warning! Read all safety warnings and all ! instructions. Failure to follow all instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f.
Vibration The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure. Warning! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used.
Labels on tools Warning! To reduce the risk of injury, the user must read the instruction manual. Features 1. 2. 3. 4. 5. 6. 7. Shoe Lock-off button Charging socket On/Off switch Blade clamp release lever Charger plug Charger Assembly Fitting and removing a saw blade (fig. A) The tool accepts both T-shank and universal shank jig saw blades. Fitting: Push down on the blade clamp release lever (5) to its fully open position. Insert the blade shank (8) from the front.
To minimise splintering, clamp a piece of scrap wood or hardboard to both sides of the workpiece and saw through this sandwich. Sawing Metal Be aware that sawing metal takes much more time than sawing wood. Use a saw blade suitable for sawing metal. When cutting thin sheet metal, clamp a piece of scrap wood to the back surface of the workpiece and cut through this sandwich. When cutting metal piping, do not cut directly through the pipe as you would saw a wooden dowel.
EC declaration of conformity Technical data Voltage No-load speed Stroke length Max. Depth of cut Wood Steel Plastic pipe Weight Charger Input voltage Output voltage Output current Approximate charging time Weight CHS6000 H1 Vdc 6 min-1 1850 mm 13 mm mm mm kg Vac Vdc mA h kg 25 2 Ø 12 0.825 VA080025D 230 8 250 6-8 0.19 Level of sound pressure according to EN 60745: Sound pressure (LpA) 77.8 dB(A), uncertainty (K) 3 dB(A) Sound power (LWA) 88.
check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our aftersales service and contacts are available on the Internet at: www.2helpU.com Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers.
E14870 14 8 6 7 8 13 5 3 2 www.2helpU.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country. Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90566125 REV 0 Tel.