Please Read and Save this Use and Care Book Por favor lea este instructivo antes de usar el producto † ™ U N D E R - T H E - C ABINET CAN OPENER ABRELATAS PARA INSTALAR DEBAJO DEL GABINETE Register your product online at www.prodprotect.com/applica, for a chance to WIN $100,000! For US residents only Registre su producto por Internet en www.prodprotect.com/applica y tendrá la oportunidad de GANAR $100,000! Solamente para residentes de EE.UU USA/Canada 1-800-231-9786 www.prodprotect.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: POLARIZED PLUG (120V Models Only) This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Product may vary slightly from what is illustrated. B A C A2 A1 1. Bag cutter 2. Knife sharpener 3. Bottle opener 4. Cover † 5. Blade assembly with magnet (Part # CO100-01) 6. Locating post 7. Piercing lever 8. Cord storage (not shown) 9. Cord management hook (not shown) Note: † indicates consumer replaceable/removable parts † 1. Mounting Parts (Part # SDC-MOUNTING KIT) A. 16 Spacers 4 ½" 4 ¼" 4 3/16" 4 1/16" B. 12 Screws 4 1" 4 1½" 4 2¼" C. 4 Washers 2.
GETTING STARTED • Remove all packing material, labels and any stickers. • Remove and save literature. • Unpack mounting parts and set them aside in a safe place where they will not roll away or get lost. Important: Do not attempt to operate appliance until it is properly installed. CHOOSE A LOCATION When choosing your location, consider the following: • DO make sure to mount within reach of an electrical outlet. • DO consider your normal work patterns in the kitchen when choosing location.
Note: To determine which screws to use, you must have enough of the screw exposed underneath the cabinet to properly thread the screw into the nut. 11. Screwing from inside the cabinet down into appliance holes, tighten 4 screws in place to secure appliance to cabinet. Note: Always tighten screws to ensure the appliance does not move or shake during operation. 12. Pull out cord from cord storage behind appliance and plug into standard electrical outlet.
12. Now, use your ruler or the paper ruler provided to measure the overhang molding height, placing your ruler vertically against the underside of the cabinet behind the overhang molding. This number determines the number of spacers you need, using a number of spacers equal to the overhang molding height. For example, a 1” overhang molding would use 2, ½” spacers on each of the rear holes (K). How to Use This appliance is for household use only. OPENING A CAN 1. Lift piercing lever. 2.
USING THE KNIFE SHARPENER 1. For best results, sharpen the entire blade length in one continuous stroke. 2. Insert blade to be sharpened with the end of the blade closest to the handle on the knife into the sharpening slot. 3. Carefully press down on the blade and pull it toward you through the slot in one continuous stroke (N). N Important: Do not saw knife back and forth to sharpen. Pull through the sharpener in one direction with a continuous, slow, even motion.
Care and Cleaning This product contains no user serviceable parts. Refer service to qualified service personnel. Important: Unplug the cord before cleaning the unit. REMOVING BLADE ASSEMBLY 1. Lift the piercing lever up as far as it will go (roughly 90°). 2. Carefully grip the blade assembly and pull it away from the can opener (R).
ENCHUFE POLARIZADO (Solamente para los modelos de 120V) Este aparato cuenta con un enchufe polarizado (un contacto es más ancho que el otro). A fin de reducir el riesgo de un choque eléctrico, este enchufe encaja en un tomacorriente polarizada en un solo sentido. Si el enchufe no entra en el tomacorriente, inviértalo y si aun así no encaja, consulte con un electricista. Por favor no trate de alterar esta medida de seguridad. El producto puede variar ligeramente del que aparece ilustrado aquí.
B A C A2 † 1. Piezas para el ensamblaje (Pieza Nº SDC-MOUNTING KIT) A. 16 Separadores 4 ½" 4 ¼" 4 3/16" 4 1/16" B. 12 Tornillos 4 1" 4 1½" 4 2¼" PASOS PRELIMINARES • Retire todo el material de empaque, etiquetas y calcomanías. • Retire y conserve toda literatura. • Desempaque las partes de montaje, y apártelos en un lugar seguro para no perderlos. Importante: No trate de operar el aparato sin antes haberlo instalado debidamente.
MONTAJE ESTÁNDAR (GABINETES DE INFERIOR PLANO) Advertencia: Siempre use gafas de protección para la vista, a fin de evitar lesiones al perforar. 1. Despeje la superficie debajo del área de instalación para evitar que caiga polvo o sucio sobre los aparatos y demás artículos. Abra los gabinetes y vacíelos para facilitar el proceso de montaje. 2. Limpie el panel inferior del gabinete por la parte de arriba y de abajo. 3.
2. Limpie el panel inferior del gabinete por la parte de arriba y de abajo. 3. Use una regla para medir el grosor del labio saliente (G), anotando con precisión el número para uso en el siguiente paso. 8. Use un taladro con broca de 6,3 mm (¼ pulg) y perfore desde abajo del gabinete, atravesando los 4 agujeros marcados en la plantilla (J). G Nota: Si no tiene una regla, corte la regla de papel provista en el borde de la plantilla de montaje. 4.
14. Según el paso No. 12, coloque el número de separadores necesarios en cada tornillo trasero para asegurar que el aparato quede nivelado (L). Como usar Este producto es para uso doméstico solamente. PARA ABRIR UNA LATA 1. Eleve la palanca. 2. Incline la lata de manera que el borde permanezca debajo de la guía de colocación y después presione la palanca, asegurándose de que la cuchilla se encuentre por dentro del borde de la lata (M).
3. Presione la cuchilla con cuidado y hale hacia usted en movimiento continuo a través de ranura (N). COMO USAR EL CORTABOLSAS 1. Tome la bolsa plástica o metálica por una esquina, sujetando el borde superior con una mano y el costado o el fondo con la otra, dependiendo del tamaño de la bolsa. 2. Coloque la esquina de la bolsa contra el cortador y tire firmemente hacia la izquierda para abrir la bolsa (Q). N Importante: No afile la cuchilla en movimiento para adelante y atrás.
Cuidado y limpieza 2. Presione el montaje de la cuchilla y gire a la derecha hasta encajar (T). Este producto no contiene piezas reemplazables por el consumidor. Para servicio, por favor acuda a personal calificado. Importante: Desconecte el cable antes de limpiar el aparato. COMO RETIRAR EL MONTAJE DE LA CUCHILLA 1. Eleve al máximo la palanca de perforar (aproximadamente el 90°). 2. Sujete el montaje de la cuchilla cuidadosamente y retírelo del abrelatas (R). T R 3.
NEED HELP? For service, repair or any questions regarding your appliance, call the appropriate 800 number on the cover of this book. Do not return the product to the place of purchase. Also, please Do not mail product back to the manufacturer, nor bring it to a service center. You may also want to consult the website listed on the cover of this manual.
† ™ Save space and regain your counters in any kitchen with our full-line of space-saving appliances. †SpaceMaker™ appliances can help tackle all your kitchen tasks while keeping your counters free of clutter! Visit www.bdspacemaker.com to learn more about †SpaceMaker™ appliances and see our latest promotional offers.