EPC12 EPC14 EPC18 EPC96
English 2 (Original instructions) 5
Intended use Your Black & Decker drill/screwdriver has been designed for screwdriving applications and for drilling in wood, metal and plastics. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Battery tool use and care a.
- The charger automatically shuts off if the ambient temperature becomes too high. The thermal cut out operates only once and then requires complete replacement. The charger automatically shuts off if the ambient temperature becomes too high. The thermal cut out operates only once and then requires complete replacement.
Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include: u Injuries caused by touching any rotating/moving parts. u Injuries caused when changing any parts, blades or accessories. u Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks. u Impairment of hearing.
Screwdriving u Always use the correct type and size of screwdriver bit. u If screws are difficult to tighten, try applying a small amount of washing liquid or soap as a lubricant. u Always hold the tool and screwdriver bit in a straight line with the screw. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual.
Voltage VDC No-load speed min-1 Max. torque Nm Chuck capacity mm Max drilling capacity Steel mm Wood mm Battery Capacity Ah Type Weight kg Battery Capacity Ah Type Weight kg Charger Input voltage VAC Output voltage VDC Current mA Approx. charging time h EPC18 (H1) 18 0-750 12.1 10 EPC96 (H1) 9.6 0-750 10.4 10 10 25 A18E 1.2 NiCd 0.82 A18NH 1.5 NiMH 0.9 10 25 B96 1.2 NiCd 0.42 90500845 90500849 90500857 90500860 230-240 21.75-22.
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
EPC96 - EPC12 - EPC14 - EPC18 Partial support - Only parts shown available Nur die aufgefuerten teile sind lieferbar Reparation partielle - Seules les pieces indiquees sont disponibles Supporto parziale - Sono disponibili soltanto le parti evidenziate Solo estan disponibles las peizas listadas So se encontram disponiveis as pecas listadas Gedeeltelijke ondersteuning - alleen de getoonde onderdelen zijn beschikbaar 1 3 2 7 8 4 6 6 5 EPC12CAB(H) EPC14CAB - EPC18CAB E15402 EPC96CA(H) - EPC12CA(H) EPC
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90559378 REV-0 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.
