www.blackanddecker.com.
10 B A C 5 D 2 E
ENGLISH Your Black & Decker drill/screwdriver has been designed for screwdriving applications and for drilling in wood, metal, plastics and soft masonry. This tool is intended for consumer use only. @ electric shock. Use of an RCD reduces the risk of A moment of inattention while operating power tools may result in serious personal injury.
ENGLISH Power tools are dangerous in the hands of untrained users. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include: Injuries caused by touching any rotating/moving parts. Injuries caused when changing any parts, blades or accessories. Injuries caused by prolonged use of a tool.
ENGLISH This tool is supplied with a double-ended screwdriver bit in the bit holder (6). To remove the screwdriver bit from the bit holder, lift the bit from the recess. T If the charger detects a weak or damaged battery, the follows: Re-insert the battery (7). Let the tool work at its own pace. Do not overload. the location of wiring and pipes. rate, use a different battery to determine if the charging process works properly.
ENGLISH B For drilling in masonry, set the collar (3) to the hammer drilling position by aligning the symbol with the marking (11). Slide the speed selector (5) towards the front of the tool (2nd gear). For drilling in steel and for screwdriving applications, slide the speed selector (5) towards the rear of the tool (1st gear). For drilling in materials other than steel, slide the speed selector (5) towards the front of the tool (2nd gear).
ENGLISH V 18 DC Min -1 Nm BPM 0-350/ 0-1500 43.7 25500 mm 13 mm 13/38/13 90581219 Input Voltage V 230 Output Voltage V 20 (Max) AC DC Current A 2 Approx. charge time min 40 Voltage V 18 Capacity Ah 1.5 DC Type Li-Ion Australia Stanley Black & Decker 82 Taryn Drive, Epping Vic, 3076, Australia New Zealand Stanley Black & Decker 90595318 Tel. 1800 338 002 Tel.