GK1630T GK1635T GK1640T
English 2 (Original instructions) 6
Intended use Your Black & Decker chainsaw has been designed for pruning and felling trees and cutting logs. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a.
u u u u u Only use replacement guide bars and chains specified by the manufacturer. Incorrect replacement guide bars and chains may cause chain breakage and/ or kickback. Follow the manufacturer's sharpening and maintenance instructions for the saw chain. Decreasing the depth gauge height can lead to increased kickback. Striking metal, cement or any other hard material near the wood, or buried in the wood can cause kickback. A dull or loose chain can cause kickback.
Additional safety instructions u u u u u This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Ensure someone is nearby (but at a safe distance) in case of an accident.
u u u Place the chain (6) over the guide bar (7) making sure that the saw chain cutters on the upper part of the guide bar (7) face towards the front (fig. B). Guide the chain (6) around the guide bar (7) and pull it to create a loop to one side at the rear end of the guide bar (7). Guide the chain (6) around the drive sprocket (12). Place the guide bar (7) onto the bar location studs (13) (fig. E).
To reset after the operation of the front guard/chain brake assembly (4) follow the instructions for "How to set the chain brake". Note: Avoid re-starting the tool until you hear the motor come to a complete rest. Note: If chain brake in malfunctioning take the product to an approved Black & Decker service centre. If the saw chain (6) or guide bar (7) becomes jammed u Switch the tool off. u Disconnect the tool from the mains supply. u Open the cut with wedges to relieve the strain on the guide bar (7).
When using a saw horse (fig. M): This is strongly recommended whenever possible. u Position the log in a stable position. Always cut on the outside of the saw horse arms. Use clamps or straps to secure the workpiece. Troubleshooting Problem Possible cause Possible sollution Tool will not start Lock button not pressed. Press the lock button.
Mains plug replacement (U.K. & Ireland only) If a new mains plug needs to be fitted: u Safely dispose of the old plug. u Connect the brown lead to the live terminal in the new plug. u Connect the blue lead to the neutral terminal. Warning! No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 10 A. Protecting the environment Separate collection. This product must not be disposed of with normal household waste.
EC declaration of conformity MACHINERY DIRECTIVE OUTDOOR NOISE DIRECTIVE % GK1630T, GK1635T, GK1640T Black & Decker declares that these products described under "technical data" are in compliance with: 98/37/EC (until Dec. 28, 2009), 2006/42/EC (from Dec. 29, 2009), EN 60745-1, EN 60745-2-13 2000/14/EC, Chain Saw, Annex V KEMA Quality B.V., Utrechtseweg 310, 6802 ED Arnhem, The Netherlands Notified Body ID No.
TYP. GK1630 GK1635 GK1640 GK1630T GK1635T GK1640T 5 152 153 111 141 139 142 138 135 140 135 145 112 144 156 151 149 146 150 137 144 101 143 147 155 102 148 103 115 113 163 116 110 114 104 119 108 121 107 117 168 123 149 149 124 120 154 167 111 149 200 118 149 161 149 158 162 133 149 125 165 136 127 157 130 131 128 129 132 GK1630T GK1635T GK1640T E15370 134 127 130 126 159 846 847 GK1630 GK1635 GK1640 WWW.2helpU.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel. 01753 511234 Fax 01753 551155 Helpline 01753 574277 ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.
