www.blackanddecker.co.
11 6 5 9 7 8 A 2 10
16 15 14 13 4 4 12 B C 15 14 13 5 15 14 13 5 12 12 D E 18 20 19 17 F G 3
19 19 21 20 20 7 9 H I 8 8 7 7 J1 J2 23 11 20 19 22 8 K 4 L
3 1 M O 25 24 N P1 P2 5
Intended use Your Black & Decker sander has been designed for sanding wood, metal, plastics and painted surfaces. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a.
Assembly Warning! Before assembly, make sure that the tool is switched off and unplugged. KA270(GT)K - Random orbit sanding base With this sanding base, you can use the tool as a random orbit sander. Fitting and removing the sanding base (fig. B) Place the sanding base (4) onto the spindle (12). Place the washer (13) onto the spindle. Insert the Allen screw (14) into the screw hole in the spindle. Tighten the Allen screw using the Allen key (15) supplied.
The additional piece of velcro fastener (23) can be attached to the top surface of the louvre attachment to allow for sanding using both sides. Remove the backing paper from the velcro fastener (23). Stick the velcro fastener to the top surface of the louvre attachment. Fit the sanding piece (23) to the velcro fastener. Use Warning! Let the tool work at its own pace. Do not overload. Warning! Do not cover the ventilation slots when using the tool. Hold the tool as shown in fig.
z Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
TYP. KA270 - KA272 1 12 16 59 9 GB 17 60 8 52 53 54 2 6 15 5 51 18 30 55 KA270K - KA270GTK 36 7 16 10 1 34 KA270GTK 57 18 46 30 45 KA270K - KA270GTK 43 40 41 37 42 23 19 13 47 48 39 38 KA270K - KA270GTK KA270LDK 20 21 28 33 49 KA270LDK 27 26 25 35 50 56 E14366 821 www.2helpU.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90531596 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.
