HP126F2K HP146F2K HP148F2K HP188F2K 1
Copyright Black & Decker 2
5 4 3 2 6 1 10 7 8 9 14 13 13 11 12 A 3
10 17 9 15 16 B C 19 4 18 19 20 D 4 21
13 14 13 9 11 12 9 E F 23 2 22 G H 5
5 3 24 I 6 J
ENGLISH CORDLESS DRILL/SCREWDRIVER HP126F2K/HP146F2K/HP148F2K/HP188F2K CONGRATULATIONS! You have chosen a Black & Decker tool. Our aim is to provide quality tools at an affordable price. We hope that you will enjoy using this tool for many years.
ENGLISH ◆ ◆ ◆ Read all of this manual carefully before operating the tool. Before operating the tool, make sure that you know how to switch the tool off in an emergency. Retain this manual for future reference. General 1. Keep work area clean Cluttered areas and benches can cause accidents. 2. Consider work area environment Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the work area well lit. Do not use the tool where there is a risk of causing fire or explosion, e.
ENGLISH Follow the instructions for maintenance and changing accessories. Keep handles and switches dry, clean and free from oil and grease. 18. Repairs This tool complies with relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user. Additional safety instructions for batteries and chargers Batteries ◆ Never attempt to open for any reason. ◆ Do not expose to water.
ENGLISH Mains plug replacement (U.K. & Ireland only) 9. Battery 10. Battery release button 11. Charger (F2K/F2B models) 12. Charger (F2C models) 13. Charging indicator 14. End of charge indicator (F2K/F2B models) ASSEMBLY ◆ ◆ ◆ ◆ ◆ ◆ ◆ Should your mains plug need replacing and you are competent to do this, proceed as instructed below. If you are in doubt, contact an authorised repair agent or a qualified electrician. Disconnect the plug from the supply and remove the fuse from the plug.
ENGLISH ◆ ◆ ◆ To remove the chuck (4), keep the release tabs (18) depressed and pull the chuck off the spindle (19). Install a screwdriver bit (20) by pushing it into the spindle (19) as shown. To remove the screwdriver bit, pull the ring (21) back and pull the screwdriver bit out of the spindle. To refit the chuck, push it onto the spindle until it is firmly locked into place. Always make sure that the chuck is securely fitted. HP188F2 - Fitting the side handle (fig.
ENGLISH HP148F2/HP188F2 - Checking the battery condition (fig. G) This tool is fitted with a battery charge indicator, which allows you to check the condition of the battery. ◆ Press and hold down the button (22). ◆ Check to see how many of the lights (23) are on: 1 light 2 lights 3 lights Battery charge low medium high Selecting the direction of rotation (fig. H) For drilling and for tightening screws, use forward (clockwise) rotation.
ENGLISH MAINTENANCE Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. Your charger does not require any maintenance apart from regular cleaning. PROTECTING THE ENVIRONMENT Tools Should you find one day that your tool needs replacement, or if it is of no further use to you, think of the protection of the environment.
ENGLISH GUARANTEE (UK, SOUTH AFRICA, AUSTRALIA AND NEW ZEALAND ONLY) Should your Black & Decker product become defective due to faulty materials or workmanship, within 24 months from the date of purchase, we guarantee to either replace all defective parts or -at our discretion- to replace the unit free of charge, provided that: ◆ The product is returned to us or one of our authorised repair agents with proof of purchase. ◆ The product has not been used for trade, professional or hire purposes.
Australia DEWALT Industrial Power Tool Company 7 Clarice Road Box Hill, Victoria 3128 Tel. 03 9895 9200 Fax 03 9899 7465 New Zealand Black & Decker 81 Hugo Johnson Drive Penrose, Auckland, New Zealand Tel. 09 579 7600 Fax 09 579 8200 South Africa Black & Decker South Africa (Pty) Ltd Physical address: 146 Lechwe Street Corporate park Randjiesfontein, Midrand Postal address: Postnet Suite 107, Private Bag X65 Halfway House 1685 Tel.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Yes No Was this tool your first purchase? Yes No Was this tool a gift? Postal code: ............................................................................................. Town: ....................................................................................................... Address: ...................................................................................................
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ GUARANTEE CARD ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ✁ Please complete this section immediately after the purchase of your tool and send it to Black & Decker in your country. If you live in Australia or New Zealand, please register by using the alternative guarantee card supplied.
