HP146F4L HP148F4L HP186F4L HP188F4L
10 B A C 5 D 2 E
(Original instructions) Intended use Your Black & Decker drill/screwdriver has been designed for screwdriving applications and for drilling in wood, metal, plastics and soft masonry. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury.
ENGLISH (Original instructions) d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use.
Residual risks. Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include: u Injuries caused by touching any rotating/moving parts. u Injuries caused when changing any parts, blades or accessories.
ENGLISH (Original instructions) This tool is supplied with a double-ended screwdriver bit in the bit holder (6). u To remove the screwdriver bit from the bit holder, lift the bit from the recess. u To store the screwdriver bit, firmly push it into the holder. Use Warning! Let the tool work at its own pace. Do not overload. Warning! Before drilling into walls, floors or ceilings, check for the location of wiring and pipes. Charging the battery (fig.
(Original instructions) HP148F4L/HP188F4 - Drilling in masonry (fig. D & E) u For drilling in masonry, set the collar (3) to the hammer drilling position by aligning the symbol with the marking (11). u Slide the speed selector (5) towards the front of the tool (2nd gear). Speed selector (fig. E) u For drilling in steel and for screwdriving applications, slide the speed selector (5) towards the rear of the tool (1st gear).
(Original instructions) ENGLISH Technical data EC declaration of conformity HP146F4L (H3) HP186F4L (H3) 14.4 18 0-350/ 0-350/ 0-1200 0-1200 Voltage V No-load speed Min Max. torque Nm 28 33 Chuck capacity mm 13 13 mm 13/38 13/38 HP148F4L (H3) HP188F4L (H3) 14.4 18 0-350/ 0-350/ DC -1 Steel/wood Voltage V No-load speed Min Max.
(Original instructions) ENGLISH Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
HP146F4L - HP148F4L HP186F4L - HP188F4L Partial support - Only parts shown available Nur die aufgefuerten teile sind lieferbar Reparation partielle - Seules les pieces indiquees sont disponibles Supporto parziale - Sono disponibili soltanto le parti evidenziate Solo estan disponibles las peizas listadas So se encontram disponiveis as pecas listadas Gedeeltelijke ondersteuning - alleen de getoonde onderdelen zijn beschikbaar 1 9 3 2 5 E16353 6 www.2helpU.com 17 - 03 - 11 TYP.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90573088 REV-0 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.
