HP126FSC HP126F2K HP128F2K HP146F2K HP148F2K HP188F2K 1
Copyright Black & Decker 2
5 4 3 2 6 1 10 7 8 9 13 12 11 A 3
10 17 9 15 16 B C 19 4 18 19 20 D 4 21
13 12 23 9 11 22 E F 3 2 24 G H 5
5 I 6
ENGLISH CORDLESS DRILL/SCREWDRIVER HP126FSC/HP126F2K/HP128F2K/ HP146F2K/148F2K/HP188F2K CONGRATULATIONS! You have chosen a Black & Decker tool. Our aim is to provide quality tools at an affordable price. We hope that you will enjoy using this tool for many years.
ENGLISH Know your tool ◆ ◆ ◆ ◆ Warning! When using battery-powered tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, leaking batteries, personal injury and material damage. Read all of this manual carefully before operating the tool. Before operating the tool, make sure that you know how to switch the tool off in an emergency. Retain this manual for future reference. General 1.
ENGLISH 16. Store idle tools When not in use, tools, batteries and chargers should be stored in a dry, locked up or high place, out of reach of children. 17. Maintain tools with care Keep cutting tools sharp and clean for better and safer performance. Follow the instructions for maintenance and changing accessories. Keep handles and switches dry, clean and free from oil and grease. 18. Repairs This tool complies with relevant safety requirements.
ENGLISH Mains plug replacement (U.K. & Ireland only) 8. Side handle (HP188F2) 9. Battery 10. Battery release button 11. Charger 12. Charging indicator 13. End of charge indicator ASSEMBLY ◆ ◆ ◆ ◆ ◆ ◆ ◆ Should your mains plug need replacing and you are competent to do this, proceed as instructed below. If you are in doubt, contact an authorised repair agent or a qualified electrician. Disconnect the plug from the supply and remove the fuse from the plug.
ENGLISH ◆ ◆ ◆ To remove the chuck (4), keep the release tabs (18) depressed and pull the chuck off the spindle (19). Install a screwdriver bit (20) by pushing it into the spindle (19) as shown. To remove the screwdriver bit, pull the ring (21) back and pull the screwdriver bit out of the spindle. To refit the chuck, push it onto the spindle until it is firmly locked into place. Always make sure that the chuck is securely fitted. HP188F2 - Fitting the side handle (fig.
ENGLISH Large screws and hard workpiece materials require a higher torque setting than small screws and soft workpiece materials. The collar has a wide range of settings to suit your application. ◆ For drilling in wood, metal and plastics, set the collar (3) to the drilling position by aligning the symbol with the marking (24). ◆ HP148F2/HP188F2: For drilling in masonry, set the collar (3) to the hammer drilling position by aligning the symbol with the marking (24).
ENGLISH PROTECTING THE ENVIRONMENT ◆ Tools Should you find one day that your tool needs replacement, or if it is of no further use to you, think of the protection of the environment. Black & Decker repair agents will accept old Black & Decker tools and ensure that they are disposed of in an environmentally safe way. Batteries Black & Decker batteries can be recharged many times.
ENGLISH ◆ ◆ ◆ ◆ The product has been used for trade, professional or hire purposes; The product has been subjected to misuse or neglect; The product has sustained damage through foreign objects, substances or accidents; Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff. To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent.
United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 5101902-05 16 Tel.
