www.blackanddecker.co.
8 9 10 7 A B 12 13 10 11 C D 3 6 7 E 2 F
Intended use Your Black & Decker hammer drill has been designed for drilling in wood, metal, plastics, and masonry as well as for screwdriving purposes. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc.
Assembly Warning! Before assembly, make sure that the tool is switched off and unplugged. Fitting the side handle and depth stop (fig. A) Turn the grip counterclockwise until you can slide the side handle (7) onto the front of the tool as shown. Rotate the side handle into the desired position. Insert the depth stop (6) into the mounting hole as shown. Set the drilling depth as described below. Tighten the side handle by turning the grip clockwise.
Mains plug replacement (U.K. & Ireland only) If a new mains plug needs to be fitted: Safely dispose of the old plug. Connect the brown lead to the live terminal in the new plug. Connect the blue lead to the neutral terminal. Warning! No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 5 A.
If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless: The product has been used for trade, professional or hire purposes; The product has been subjected to misuse or neglect; The product has sustained damage through foreign obj
AST1XC - TY6 TYP. CD51RE - CD51CRE - KR45 - KR45RE KR50RE - KR50CRE - KR52CRE - KR53CRE KR55RE - KR55CRE 1 5 4 11 2 25 18 15 14 CD51RE - KR45RE KR50RE - KR55RE 13 12 11 28 20 16 1 23 21 26 4 22 9 3 6 7 30 8 27 800 24 GB E14720 8 www.2helpU.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90535273 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.