www.blackanddecker.
10 11 10 11 A 14 4 8 5 C B 4 4 12 8 6 8 7 D E 9 9 7 F1 2 7 F2
13 9 H 2 I G 1 J 3
Intended use Your Black & Decker sander has been designed for sanding and polishing wood, metal, plastics and painted surfaces. This tool is intended for consumer use only. Safety instructions ◆ ◆ ◆ ◆ Warning! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. Read all of this manual carefully before operating the tool. Retain this manual for future reference.
Electrical safety This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. Additional safety instructions for sanders ◆ Always wear a dust mask whenever sanding. ◆ Thoroughly remove all dust after sanding. ◆ Before using the tool on wooden workpieces, make sure to fit dust extraction equipment. ◆ Before using the tool on metal workpieces, make sure to remove the dust extraction equipment.
◆ ◆ ◆ When the front part of the tip is worn, detach it from the sheet, reverse it and press it onto the sanding base again. When the whole tip is worn, remove it from the sanding base and fit a new tip. The polishing foam and pads (14) can be fitted the same way as the sanding sheets. Tip of the sanding base (fig. C) When the sanding base tip (5) or tip holder (4) is worn, it can be reversed or replaced. Spare parts are available from your Black & Decker dealer. ◆ Remove the screw (8).
You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com. Technical data Voltage Power input No-load speed To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent.
TYP 1 KA161 - KA161K 101 105 104 106 103 102 KA161K E13387 / 582158-00 8 WWW.2helpU.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Yes No Was this tool your first purchase? Yes No Was this tool a gift? Postal code: .......................................................................................................................... Town: .................................................................................................................................... Address: ....................................................
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ GUARANTEE CARD ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ✁ Please complete this section immediately after the purchase of your tool and send it to Black & Decker in your country. If you live in Australia or New Zealand, please register by using the alternative guarantee card supplied.
