www.blackanddecker.
10 11 10 11 A 14 4 8 5 C B 4 4 12 8 6 8 7 D E 9 9 7 F1 2 7 F2
13 9 H 2 I G 1 J 3
Intended use Your Black & Decker sander has been designed for sanding and polishing wood, metal, plastics and painted surfaces. This tool is intended for consumer use only. General safety rules Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. SAVE THESE INSTRUCTIONS. 1.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc.
◆ ◆ ◆ When the front part of the tip is worn, detach it from the sheet, reverse it and press it onto the sanding base again. When the whole tip is worn, remove it from the sanding base and fit a new tip. The polishing foam and pads (14) can be fitted the same way as the sanding sheets. Tip of the sanding base (fig. C) When the sanding base tip (5) or tip holder (4) is worn, it can be reversed or replaced. Spare parts are available from your Black & Decker dealer. ◆ Remove the screw (8).
You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com . Technical data V o l ta g e Po we r i n p u t No-load speed To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent.
TYP 1 KA161 - KA161K 101 105 104 106 103 102 KA161K E13387 / 8 WWW.2helpU.
90528516 10 10/07
