® KA200 KA210 KA220 KA230
Congratulations! On the purchase of your Black & Decker multi sander. To ensure the best results from your multi sander please read these safety and usage instructions carefully. If you have any questions or queries after reading this user manual please do not hesitate to call our Service and Information Centre, whose number you will find towards the back of this user manual, or one of our Authorised Repair Agents. A list of these Agents and further information is available on the Internet at www.2helpU.
Contents Page 4 Safety instructions Additonal precautions to take when sanding paint and MDF Page 5 Personal safety Environmental safety Cleaning and disposal Double insulation Electrical safety Mains plug replacement Page 6 Extension cables Unwanted tools and the environment The Black & Decker guarantee After sales service for your Black & Decker product Our after sales service policy Accessories Technical data Features Page 7 Operating your multi sander Variable speed control Using your multi sande
Multi sander user manual SAFETY INSTRUCTIONS Warning! When using electric tools, the following basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Read all these instructions before attempting to operate the product and save this booklet. FOR SAFE OPERATION: • Keep the work area clean. Cluttered areas and benches invite injuries. • Consider the work area environment. Do not expose the power tool to rain and do not use in damp or wet locations.
ENGLISH Any pre-1960 building may have been painted in the past with paint containing lead, and covered by additional layers of paint. It is important to determine whether the paint that is being sanded contains lead before beginning work. This can be done with lead test kits or by a professional decorator. If in doubt, we recommend the following precautions when sanding any paint or MDF.
ENGLISH Black & Decker service agent because special purpose tools are required. EXTENSION CABLES Up to 30m (100ft) of 3-core extension cable can be used without undue loss of power. Note: An extension cable should not be used unless absolutely necessary. Use of an improper extension cable could result in a risk of fire and electric shock. If an extension cable must be used, make sure it is properly wired, contains the correct rated fuse as recommended in its literature and is in good electrical condition.
ENGLISH OPERATING YOUR MULTI SANDER To switch your multi sander on, press the on/off switch on the side marked “I”. To switch your multi sander off, press the on/off switch on the side marked “O”. Before plugging your multi-sander in, make sure it is switched off. VARIABLE SPEED CONTROL (KA210E/KA220E/KA230E) The variable speed control gives the best operating performance for each material.
ENGLISH washer in position on the base and fit the screw using the allen key provided. Press the base on firmly when tightening the screw. REVERSING THE POINTED BASE (KA210/KA210E/KA220/KA220E/KA230E) Proceed as follows: Disconnect the plug from the electricity supply. Turn the screw anticlockwise using the allen key provided in the handle. Remove the screw and the washer from the spindle. Hold the base in position with the point facing rearwards. Fit the washer and the screw.
ENGLISH follows the shape. Never use your sander without sandpaper. REMOVING THE SIDE HANDLE Proceed as follows: Turn the handle anticlockwise and unscrew completely. Remove the connecting shoulder. Unclip the metal clip. ADJUSTING THE SIDE HANDLE Proceed as follows: Loosen the handle slightly. Move the metal clip around the body of the sander until the side handle is in the desired position. Tighten the handle. DUST EXTRACTION SYSTEM Most of the dust from the work surface is collected in the dustbag.
ENGLISH A weighted sound power 90.1dB (A) Hand/arm weighted vibration <2.5m/s2 Brian Cooke - Director of Engineering Black & Decker Ltd, Spennymoor, County Durham DL16 6JG United Kingdom The Black & Decker policy is one of continuous improvement to our product and as such we reserve the right to change the product specification without prior notice.
Data protection act: Tick this box if you prefer not to receive information from Black & Decker or other companies.
GUARANTEE CARD FOR THE UK, IRELAND AND SOUTH AFRICA South Africa: Black & Decker South Africa (Pty) Ltd, Suite no 107, PostNet X65, Halfway House 1685 United Kingdom & Ireland: PO Box 821, Slough, Berkshire, SL1 3AR Please complete this section immediately after the purchase of your multi-sander and post it to the Black & Decker address in your country (above). Part no: 375614 2/99.