KA902E
English 2 (Original instructions) 6
Intended use Your Black & Decker PowerfileTM sander has been designed for sanding wood, metal, plastics and painted surfaces. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. u Safety of others u 5. Service a.
the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time. Cranked arm (9) for grooving and sanding in the centre of workpieces and for reaching confined areas Before first use, you must fit the sanding arm to the tool. Labels on tool Fitting u Make sure that the belt tensioning lever (5) is in the position shown. u Loosen and remove the belt tracking knob (6). u Remove the tape retaining the spring (12) (if present).
Fitting and removing the deflector (fig. D & E) Warning! The deflector must be used when sanding metal workpieces. u Fit the deflector (11) over the dust extraction outlet. u Slide the deflector onto the tool and make sure that it is securely located. u To remove the deflector, pull it to the rear and off the outlet. Use Warning! Let the tool work at its own pace. Do not overload. Variable speed control (fig.
Protecting the environment Z EC declaration of conformity Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. z Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90563174 REV-0 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.