® | @ A B C À Á Â Ã , y z { @| A B C À Á Â Ã , y z { | @ A B C À Á Â Ã , y z { @ A B C À Á Â Ã , y z { | KD350 KD351 KD352 KD353 KD354 KD355 KD356 KD455
Congratulations! On the purchase of your Black & Decker corded drill. To ensure the best results from your corded drill please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual).
Contents Page 4 Safety instructions Double insulation Page 5 Electrical safety Mains plug replacement Extension cables Unwanted tools and the environment The Black & Decker guarantee Page 6 After sales service for your Black & Decker product Our after sales service policy Accessories Technical data Features Fitting the drill bit Page 7 Removing the chuck Fitting the side handle Setting the adjustable depth stop Preparing your drill for operation Page 8 Using your drill Handy hints Cooling down Over
Corded drills user manual SAFETY INSTRUCTIONS Warning! When using electric tools, the following basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Read all these instructions before attempting to operate the product and save this booklet. For safe operation: • Keep the work area clean. Cluttered areas and benches invite injuries. • Consider the work area environment. Do not expose the power tool to rain and do not use in damp or wet locations.
ENGLISH from the mains power supply. This is done by placing insulation barriers between the electrical and mechanical components making it unnecessary for the tool to be earthed. Note: Double insulation does not take the place of normal safety precautions when operating the tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. ELECTRICAL SAFETY Be sure the supply is the same as the voltage given on the rating plate.
ENGLISH This guarantee is offered as an extra benefit and is additional to the customers statutory rights. AFTER SALES SERVICE FOR THE BLACK & DECKER PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY) Black & Decker offers a nationwide after sales service through our company operated service centres and concessionaries on the Channel Islands and Isle of Man. It is our aim to offer excellent service, fast repairs, extensive parts availability and full accessory support.
ENGLISH FITTING THE DRILL BIT (KEYED CHUCKS) Proceed as follows: Disconnect the plug from the electricity supply. Rotate the barrel of the chuck until the jaws are sufficiently open. Insert the drill bit in the jaws of the chuck. Insert the chuck key with the end of the chuck key in one of the three holes in the body of the chuck and the head of the chuck key engaged with the barrel of the chuck. Turn the chuck key clockwise to tighten the jaws and securely grip the drill bit. Remove the chuck key.
ENGLISH yy @@ ÀÀ ,, @@ ÀÀ ,, yy @@ ÀÀ ,, yy @@ ÀÀ ,, yy the speed switch or the forward/reverse when your drill is operating. USING YOUR DRILL To switch your drill on, depress the on/off switch. Your drill stops when the on/off switch is released. If continuous operation is required, depress the lock-on button while the on/off switch is depressed. To stop your drill when operation is continuous, depress the on/off switch again and release.
Australia Black & Decker (A’asia) Pty Ltd 286-288 Maroondah Highway North Croydon, Victoria 3136 Tel: 03 9213 8200 Fax: 03 9726 7150 New Zealand Black & Decker 483 Great South Road, Penrose, Auckland Tel: 09 579 7600 Fax: 09 579 8200 South Africa Powerdek Tool Distributors 22 Inglestone Road, Village Deep Johannesburg, South Africa Tel: 011 493 4000 Fax: 011 493 6391 United Kingdom Black & Decker 210 Bath Road Slough Berkshire SL1 3YD Tel: Tel: Tlx: Fax: 10Part no: 808378-02 8/96.
Data protection act: Tick this box if you prefer not to receive information from Black & Decker or other companies.
GUARANTEE CARD Australia: Call 1900 937766 (the maximum call charge is $2.00 excluding tax) New Zealand: Call 0900 97766 (the maximum call charge is $2.00 excluding tax) South Africa: After sales service, PO Box 5303, Johannesburg 2000 United Kingdom & Ireland: PO Box 821, Slough, Berkshire, SL1 3AR Please cut out this section, put into a stamped addressed envelope and post immediately after the purchase of your corded drill to the Black & Decker address in your country (above).