KD1250
A B 2 C
D E F 3
ENGLISH (Original instructions) Intended use Your Black & Decker rotary hammer drill has been designed for drilling in wood, metal, plastics, and masonry as well as for screwdriving and light chiselling applications. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury.
(Original instructions) d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use.
ENGLISH (Original instructions) Warning! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. The vibration level may increase above the level stated.
(Original instructions) Hammer drilling u For hammer drilling in masonry and concrete, set the operating mode selector (4) to the position and the drilling mode selector (3) to the position. When hammering, the tool should not bounce and run smoothly. If necessary, increase the speed. Hammering u For hammering with spindle lock, and for light chiselling and chipping, set the operating mode selector (4) to the position and the drilling mode selector (3) to the position.
ENGLISH (Original instructions) Technical data EC declaration of conformity % MACHINERY DIRECTIVE KD1250 (Type 1) Input voltage VAC 230 Power input W 1250 No-load speed min-1 0-850 Impact rate min-1 0-4100 j 3.2 kg 5.4 Concrete mm 32 Steel mm 13 Wood mm 40 Impact energy per stroke according to EPTA-Procedure 05/2009 Weight Max.
(Original instructions) ENGLISH Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90598534 REV-1 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.
