www.blackanddecker.co.
A B C D 2
E 3
ENGLISH (Original instructions) Intended use Your BLACK+DECKER KG1202 angle grinder has been designed for grinding and cutting metal and masonry using the appropriate type of cutting or grinding disc. When fitted with the appropriate guard, this tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions.
(Original instructions) e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc.
ENGLISH (Original instructions) Kickback and related warnings Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory. Pinching or snagging causes rapid stalling of the rotating accessory which in turn causes the uncontrolled power tool to be forced in the direction opposite of the accessory's rotation at the point of the binding.
(Original instructions) Safety warnings specific for sanding operations u Do not use excessively oversized sanding disc paper. Follow manufacturers recommendations, when selecting sanding paper. Larger sanding paper extending beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback. Safety warnings specific for polishing operations u Do not allow any loose portion of the polishing bonnet or its attachment strings to spin freely.
ENGLISH u (Original instructions) Secure the flange with the screws (10). Make sure that the screws are fully tight and that the guard can be rotated. Removing u Use a screwdriver to remove the screws (10). u Remove the flange (9), guard (6) and spring washer (8). Store these parts carefully. Warning! Never use the tool without the guard. Adjusting the guard The guard can be rotated 90°. u Rotate the guard as required.
(Original instructions) Mains plug replacement (U.K. & Ireland only) If a new mains plug needs to be fitted: u Safely dispose of the old plug. u Connect the brown lead to the live terminal in the new plug. u Connect the blue lead to the neutral terminal. Warning! No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A. Protecting the environment Z Separate collection.
ENGLISH (Original instructions) Guarantee Black & Decker is confident of the quality of its products and offers consumers a 24 month guarantee from the date of purchase. This guarantee is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker Tel. 5 Te Apunga Place Fax Mt Wellington Aukland 1060 Tel. Fax 03-8720 5100 03-9727 5940 +64 9 259 1133 +64 9 259 1122 United Kingdom & Black & Decker Tel. 01753 511234 Republic Of Ireland 210 Bath Road Fax 01753 512365 www.blackanddecker.co.uk Slough, Berkshire SL1 3YD emeaservice@sbdinc.
