Amoladora Angular Angle Grinder MANUAL DE INSTRUCCIONES INSTRUCTION MANUAL Cat. N° KG2001 Español English Advertencia: Léase este instructivo antes de usar el producto. Warning: Read instruction manual before using product.
ESPAÑOL
ESPAÑOL
ESPAÑOL
ESPAÑOL / 5/8"-11/M14 Pueden consultar la dirección de su servicio en la lista de Centros de Servicio en Latinoamérica incluída con esta herramienta o poniéndose en contacto con la oficina local de Black & Decker en la dirección que se indica al final de este manual.
ENGLISH Intended use Your Black & Decker angle grinder has been designed for cutting metal and masonry using the appropriate type of cutting or grinding disc.This tool is intended for consumer use only. Safety instructions Warning! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. Read all of this manual carefully before operating the tool.
ENGLISH Electrical safety This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. Additional safety instructions for angle grinders Read the instruction manual before use. Wear safety glasses or goggles when operating this tool. Wear ear protection when operating this tool. Always use eye and ear protection when operating this tool.
ENGLISH Fitting and removing grinding or cutting discs (fig. C - F) Always use the correct type of disc for your application. Always use discs with the correct diameter and bore size (see technical data). The maximum thickness for grinding discs is 6 mm, for cutting discs 3.5 mm. Fitting Fit the guard as described above. Place the inner flange (11) onto the spindle (6) as shown (fig. C). Make sure that the flange is correctly located on the flat sides of the spindle.
ENGLISH Solamente para propósito de Argentina: Importado por: Black & Decker Argentina S.A. Pacheco Trade Center Colectora Este de Ruta Panamericana Km. 32.0 El Talar de Pacheco Partido de Tigre Buenos Aires (B1618FBQ) República de Argentina No. de Importador: 1146/66 Tel. (011) 4726-4400 Imported by/Importado por: Black & Decker do Brasil Ltda. Rod. BR 050, s/n° - Km 167 Dist. Industrial II Uberaba ˆ MG ˆ Cep: 38064-750 CNPJ: 53.296.273/0001-91 Insc. Est.: 701.948.711.00-98 S.A.C.