2 5 1 4 3 KG2000 KG2001
9 5 7 9 6 8 8 10 A B 14 11 6 12 13 11 6 C 2 D
14 12 11 6 15 14 12 14 12 11 6 4 E F 3
ENGLISH (Original instructions) Intended use Your Black & Decker angle grinder has been designed for grinding and cutting metal and masonry using the appropriate type of cutting or grinding disc. When fitted with the appropriate guard, this tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions.
(Original instructions) d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use.
ENGLISH (Original instructions) Regularly clean the power tool's air vents. The motor's fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards. u Do not operate the power tool near flammable materials. Sparks could ignite these materials. u Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.
(Original instructions) u u Support panels or any oversized workpiece to minimize the risk of wheel pinching and kickback. Large workpieces tend to sag under their own weight. Supports must be placed under the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel. Use extra caution when making a "pocket cut" into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback.
ENGLISH (Original instructions) Labels on tool : The following pictograms are shown on the tool: O N Warning! To reduce the risk of injury, the user must read the instruction manual. Wear safety glasses or goggles when operating this tool. Wear ear protection when operating this tool. Electrical safety # u This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.
ENGLISH (Original instructions) Switching on and off To switch the tool on, press the lock-off button (2) and subsequently press the on/off switch (1). u To switch the tool off, release the on/off switch (1). Warning! Do not switch the tool off while under load. u Hints for optimum use u u Firmly hold the tool with one hand around the side handle and the other hand around the main handle. When grinding, always maintain an angle of approx. 15° between the disc and the workpiece surface.
ENGLISH (Original instructions) L pA (sound pressure) 94.5 dB(A), Uncertainty (K) 3 dB(A) L WA (accoustic power) 105.5 dB(A), Uncertainty (K) 3 dB(A) Vibration total values (triax vector sum) according to EN 60745: Surface grinding (ah,SG) 4.8 m/s2, uncertainty (K) 1.5 m/s2 Polishing (ah,P) 9.0 m/s2, uncertainty (K) 1.5 m/s2 Disc sanding (ah,DS) 3.2 m/s2, uncertainty (K) 1.5 m/s2 Wire brushing (ah) 4.5 m/s2, uncertainty (K) 1.5 m/s2 Cutting-off (ah) 4.5 m/s2, uncertainty (K) 1.
TYP. KG2000 - KG2001 24 26 61 23 22 28 17 18 16 34 32 38 37 35 6 25 3-4 39 20 18 17 50 19 62 21 41 40 42 46 43 44 45 49 48 47 41 51 9 52 53 54 55 57 46 8 7 6 63 58 5 4 59 60 3 2 1 E15701 www.2helpU.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel. 01753 511234 Fax 01753 551155 ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.