2 3 1 4 www.blackanddecker.co.
4 8 13 11 7 9 6 12 10 5 4 9 5 B A 14 13 C 2 11 D
(Original instructions) ENGLISH 13 16 15 10 5 E 3
ENGLISH (Original instructions) Intended use Your BLACK+DECKER KG711, KG911, KG912, KG752 angle grinders have been designed for grinding and cutting metal and masonry using the appropriate type of cutting or grinding disc. When fitted with the appropriate guard, this tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions.
(Original instructions) d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use.
ENGLISH (Original instructions) Using water or other liquid coolants may result in electrocution or shock. Note: The above warning does not apply for power tools specifically designed for use with a liquid system. Kickback and related warnings Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory.
(Original instructions) u Use extra caution when making a "pocket cut" into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback. Safety warnings specific for sanding operations u Do not use excessively oversized sanding disc paper. Follow manufacturers recommendations, when selecting sanding paper.
ENGLISH (Original instructions) guard for cutting operations part numbers 1004702-27 and 1004702-28 for KG711/KG911 and KG912/KG752 is available and can be obtained from BLACK+DECKER service centres. Removing u Keep the spindle lock (3) depressed and loosen the outer flange (13) using the two-pin spanner (14) (fig. D). u Remove the outer flange (13) and the disc (11). Fitting and removing the guard (fig. A) KG912 Only Fitting and removing sanding discs (fig.
ENGLISH (Original instructions) Hints for optimum use Firmly hold the tool with one hand around the side handle and the other hand around the main handle. When grinding, always maintain an angle of approx. 15° between the disc and the workpiece surface. Maintenance Your BLACK+DECKER corded/cordless appliance/tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
ENGLISH (Original instructions) KG752 LpA (sound pressure) 94.5 dB(A), Uncertainty (K) 3 dB(A) LWA (sound power) 105.5 dB(A), Uncertainty (K) 3 dB(A) Vibration total values (triax vector sum) according to EN60745: Surface grinding (ah,SG) 9.9 m/s2, uncertainty (K) 1.5 m/s2 Cutting-off (ah) 9.1 m/s2, uncertainty (K) 1.5 m/s2 Polishing (ah,P) 5.0 m/s2, uncertainty (K) 1.5 m/s2 Disc sanding (ah,DS) 3.3 m/s2, uncertainty (K) 1.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker Tel. 5 Te Apunga Place Fax Mt Wellington Aukland 1060 Tel. Fax 03-8720 5100 03-9727 5940 +64 9 259 1133 +64 9 259 1122 United Kingdom & Black & Decker Tel. 01753 511234 Republic Of Ireland 210 Bath Road Fax 01753 512365 www.blackanddecker.co.uk Slough, Berkshire SL1 3YD emeaservice@sbdinc.
