Quick Start Guide

10
Dust extraction
An adaptor is required to connect a vacuum cleaner or dust
extractor to the tool.
u Insert the dust extraction adaptor into the saw dust outlet (12).
u Connect the vacuum cleaner hose to the adaptor.
Maintenance
Your Black & Decker corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
u Switch off and unplug the appliance/tool.
u Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
u Or run the battery down completely if it is integral and then
switch off.
u Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u Regularly open the chuck and tap it to remove any dust
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new plug.
u Connect the blue lead to the neutral terminal.
u Connect the green/yellow lead to the earth terminal.
Warning! Follow the tting instructions supplied with good
quality plugs. Recommended fuse: 13 A.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you nd one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker ofce at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
KS1400L TYPE1 KS1401L TYPE1
Input voltage V
AC
230 230
Power input W 1,400 1,400
No-load speed min
-1
5,000 5,000
Max. depth of cut mm 65 65
Depth of cut at 45° bevel mm 50 50
Blade diameter mm 190 190
Blade bore mm 16 16
Blade tip width mm 2.3 2.3
Laser properties:
Laser class 2 2
Wave length nm 650 650
Laser power mW < 5 < 5
Weight kg 5.4 5.4
KS1500L TYPE1 KS1501L TYPE1
Input voltage V
AC
230 230
Power input W 1,500 1,500
No-load speed min
-1
5,000 5,000
Max. depth of cut mm 65 65
Depth of cut at 45° bevel mm 50 50
Blade diameter mm 190 190
Blade bore mm 16 16
Blade tip width mm 2.3 2.3
Laser properties:
Laser class 2 2
Wave length nm 650 650
Laser power mW < 5 < 5
Weight kg 5.4 5.4