KS600E KS601E KS602E KS603E
English 2 (Original instructions) 5
Intended use Your Black & Decker jigsaw has been designed for sawing wood, plastics and sheet metal. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a.
Warning! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. The vibration level may increase above the level stated.
u Tighten the screws (8). Variable speed control The tool has a variable speed on/off switch (1). The operating speed depends on how far you press the switch. u Use a high speed for wood, medium speed for aluminium and PVC and low speed for metals other than aluminium. Switching on and off u u u u To switch the tool on, press the on/off switch (1). To switch the tool off, release the on/off switch (1). For continuous operation, press the lock-on button (2) and release the on/off switch (1).
Technical data Input voltage VAC Power input W No-load speed min-1 Max. depth of cut Wood mm Steel mm Aluminium mm Weight kg KS600E/KS601E KS602E/KS603E(Type 1) 230 450 0-3,000 60 5 10 1.9 Level of sound pressure according to EN 60745: Sound pressure (LpA) 89 dB(A), uncertainty (K) 3 dB(A) Sound power (LWA) 100 dB(A), uncertainty (K) 3 dB(A) Vibration total values (triax vector sum) according to EN 60745: Cutting wood (ah,cw) 7.7 m/s2, uncertainty (K) 2.4 m/s2 Cutting sheet metal (ah,cm) 9.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90563152 REV-0 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.
