www.blackanddecker.
3 20 19 22 18 21 2-3 mm A B 2-3 mm 13 6 24 12 C 2 5 25 D 11
28 27 8 26 7 11 E F 33 14 30 31 29 32 15 G 3
Intended use Your Black & Decker saw has been designed for sawing wood and wood products. This tool is intended for consumer use only. General safety rules Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. SAVE THESE INSTRUCTIONS. 1. Work area a.
g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts.
Safety instructions for saws with a pendulum blade guard ◆ Check lower guard for proper closing before each use. Do not operate the saw if lower guard does not move freely and close instantly. Never clamp or tie the lower guard into the open position. If saw is accidentally dropped, lower guard may be bent. Raise the lower guard with the retracting handle and make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut.
◆ ◆ Remove the outer washer (19). Remove the saw blade (21). Fitting ◆ Place the saw blade onto the inner washer (22), making sure that the arrow on the blade points in the same direction as the arrow on the tool. ◆ Fit the outer washer (19) on the spindle, with the raised part pointing away from the saw blade. ◆ Insert the blade retaining screw (20) into the hole. ◆ Insert a screwdriver into the hole (18) to prevent the saw blade from rotating. KS65K: keep the spindle lock (16) depressed.
KS65K - Using the sight guide (fig. G) ◆ Adjust the sight guide (15) as described above. ◆ Before operating the saw, look through the window (14) to align the saw with the cutting line. Keep the sight guide (15) aligned with the cutting line while sawing. Dust extraction An adaptor is required to connect a vacuum cleaner or dust extractor to the tool. The adaptor can be purchased from your local Black & Decker retailer. ◆ Insert the dust extraction adaptor into the saw dust outlet (17).
EC declaration of conformity KS55/KS64/KS65 Black & Decker declares that these products conform to: 98/37/EC, 89/336/EEC, EN 60745, EN 55014, EN 61000 Kevin Hewitt Director of Consumer Engineering Spennymoor, County Durham DL16 6JG, United Kingdom 1-5-2006 Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights.
TYP 1 KS55 KS64 19 3 55 20 35 4 KS55 24 55 36 56 18 14 17 KS64 57 13 5 53 15 3 23 22 40 16 1 6 3 2 7 29 51 21 10 39 38 52 41 37 28 42 2.5 2. 0 27 25 32 9 49 31 43 30 33 50 54 46 30 34 816 817 KS64 E13203 10 821 WWW.2helpU.
TYP 1 KS65K 3 19 20 67 70 24 69 78 14 77 68 18 66 13 17 65 63 72 64 55 15 73 74 3 23 22 4 55 36 56 57 53 40 16 5 1 6 2 3 7 29 51 21 10 39 38 52 41 37 28 42 27 31 25 43 58 46 32 9 61 62 59 76 75 49 60 50 71 816 30 33 821 34 E13216 WWW.2helpU.com 817 2.5 2.
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker 81 Hugo Johnston Drive Penrose, Auckland, New Zealand United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 573644-03 12 Tel. 09 579 7600 Fax 09 579 8200 Tel.