Operation Manual

8
KS65K - Using the sight guide (fig. G)
◆ Adjust the sight guide (15) as described above.
◆ Before operating the saw, look through the window (14)
to align the saw with the cutting line. Keep the sight
guide (15) aligned with the cutting line while sawing.
Dust extraction
An adaptor is required to connect a vacuum cleaner or dust
extractor to the tool. The adaptor can be purchased from your
local Black & Decker retailer.
◆ Insert the dust extraction adaptor into the saw dust outlet
(17).
◆ Connect the vacuum cleaner hose to the adaptor.
Hints for optimum use
◆ As some splintering along the line of cut on the top side
of the workpiece cannot be avoided, cut on the side
where splintering is acceptable.
◆ Where splintering is to be minimised, e.g. when cutting
laminates, clamp a piece of plywood onto the top of the
workpiece.
Accessories
The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you will
get the very best from your tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
◆ Regularly clean the ventilation slots with a clean,
dry paint brush.
◆ To clean the tool, use only mild soap and a damp cloth.
Never let any liquid get inside the tool and never immerse
any part of the tool into liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
◆ Safely dispose of the old plug.
◆ Connect the brown lead to the live terminal in the new plug.
◆ Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
KS55 KS64 KS65
Input voltage V
AC
230 230 230
(Australia & New Zealand) V
AC
240
Power input W 1,200 1,300 1,400
No-load speed min
-1
5,000 5,000 5,000
Max. depth of cut mm 55 65 65
Blade diameter mm 170 190 190
Blade bore mm 16 16 16
Blade tip width mm 2.6 2.6 2.6
L
pA
(sound pressure) dB(A) 93.2 95.0 95.0
K
pA
(sound pressure uncertainty) dB(A) 3 3 3
L
WA
(acoustic power) dB(A) 104.2 106.0 106.0
K
WA
(acoustic power uncertainty) dB(A) 3 3 3
Hand/arm weighted vibration m/s
2
1.74 2.20 2.20
Weight kg 5.4 5.4 5.4
ENGLISH