UK Ireland Australia New Zealand
Intended use Your Black & Decker jigsaw has been designed for sawing wood, plastics and sheet metal. This tool is intended for consumer use only. Safety instructions General power tool safety warnings Warning! Read all safety warnings and all ! instructions. Failure to follow all instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean.
When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons regularly using power tools in employment, an estimation of vibration exposure should consider, the actual conditions of use and the way the tool is used, including taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time. Additional safety instructions for lasers Read all of this manual carefully.
that the saw blade has stopped. Used saw blades may be hot. Fitting the saw blade (fig. B) X Hold the saw blade (10) as shown, with the teeth facing forward. X Push and hold the blade clamp (9) down. X Insert the shank of the saw blade into the blade holder (11) as far as it will go. X Release the blade clamp (9). Saw blade storage (fig. C) Saw blades (10) can be stored in the storage compartment located on the side of the tool.
Viewing from directly above the jigsaw, the line of cut (16) can be easily followed. Should this view be restricted for any reason, the laser can be used as an alternative cutting guide. X Use a pencil to mark the cutting line (16). X Position the jigsaw over the line (16). X Switch on the laser. Operating the work light (fig. K and L) ('W' units only) Units that include a 'W' in the catalogue number are provided with an LED light (18) to illuminate the area around the blade.
Protecting the environment Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. Separate collection of used products and packaging allows materials to be recycled and used again.
X X The product has sustained damage through foreign objects, substances or accidents. Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff. To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual.
$XVWUDOLD %ODFN 'HFNHU $XVWUDOLD 3W\ /WG )OHWFKHU 5RDG 0RRURROEDUN 9LFWRULD 1HZ =HDODQG %ODFN 'HFNHU 7H $SXQJD 3ODFH 0W :HOOLQJWRQ $XFNODQG 8QLWHG .
