KS888E
English 2 (Original instructions) 4
A B C D E F 3
Intended use Your Black & Decker jigsaw has been designed for sawing wood, plastics and sheet metal. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a.
Warning! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. The vibration level may increase above the level stated. Adjusting the blade support roller (fig.
u release the variable speed switch. This option is available only at full speed. To switch the tool off, release the variable speed switch. To switch the tool off when in continuous operation, press the variable speed switch once more and release it. How to use the SightLine™ feature (fig. F) Use a pencil to mark the cutting line. Position the jigsaw over the line (15). Viewing from directly above the jigsaw the line of cut can be easily followed.
Technical data Input voltage VAC Power input W Number of strokes min-1 Max. depth of cut Wood mm Steel mm Aluminium mm KS888E Type 1 230 500 0 - 3,200 65 4 10 Level of sound pressure according to EN 60745: Sound pressure (LpA) 87 dB(A), uncertainty (K) 3 dB(A) Sound power (LWA) 98 dB(A), uncertainty (K) 3 dB(A) Vibration total values (triax vector sum) according to EN 60745: Cutting wood (ah,cw) 10.5 m/s2, uncertainty (K) 2.6 m/s2 Cutting sheet metal (ah,cm) 7.3 m/s2, uncertainty (K) 3.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90563664 REV-0 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.
