www.blackanddecker.co.
English 2 (Original instructions) 6
Intended use Your Black & Decker jigsaw has been designed for sawing wood, plastics and metal. This tool is intended for consumer use only. Safety instructions General power tool safety warnings Warning! Read all safety warnings and all ! instructions. Failure to follow all instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f.
When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons regularly using power tools in employment, an estimation of vibration exposure should consider, the actual conditions of use and the way the tool is used, including taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time.
Insert the shank of the saw blade into the blade holder (12) as far as it will go. Release the blade clamp (11). Saw blade storage (fig. C) Saw blades (10) can be stored in the storage compartment (4) located on the side of the tool. Open the cover of the saw blade storage compartment (4) by holding the tab on the top of the cover and pulling it outward. The blades are retained in the compartment by a magnetic strip.
Operating the laser (fig. I - L) (KS900EL unit only) Sawing metal Installing the batteries (fig. I) Be aware that sawing metal takes much more time than sawing wood. Use a saw blade suitable for sawing metal. When cutting thin sheet metal, clamp a piece of scrap wood to the back surface of the workpiece and cut through this sandwich. Spread a film of oil along the intended line of cut. Detach the laser module (17) from the jigsaw by removing the screw (16) and pulling the laser module forward.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual.
Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff. To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
90561196 REV 1 S/L-02/2011
