www.blackanddecker.co.
English 2 (Original instructions) 6
Intended use Your Black & Decker jigsaw has been designed for sawing wood, plastics and metal. This tool is intended for consumer use only. Safety instructions General power tool safety warnings Warning! Read all safety warnings and all ! instructions. Failure to follow all instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f.
all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time. Labels on tools Warning! To reduce the risk of injury, the user must read the instruction manual. Electrical safety This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. This appliance is not intended for use by young or infirm persons without supervision.
The blades are retained in the compartment by a magnetic strip. To remove a blade, press down on one end of the blade to raise the other end, and remove. Close the cover (3) of the saw blade storage compartment and make sure that it is latched closed. Warning! Close the compartment door securely before operating the saw. Push the shoe plate locking lever (4) back towards the saw to lock the shoe plate (7). Connecting a vacuum cleaner to the tool (fig.
How to use the Auto SelectTM dial (fig. G) This tool is fitted with a unique Auto SelectTM Dial (8) to set the speed and the pendulum blade action for various cutting applications.
Viewing from directly above the jigsaw, the line of cut (17) can be easily followed. Should this view be restricted for any reason, the laser can be used as an alternative cutting guide. Use a pencil to mark the cutting line (17). Position the jigsaw over the line (17). Switch on the laser. Operating the work light (fig. L and M) ('W' units only) Units that include a 'W' in the catalogue number are provided with an LED light (19) to illuminate the area around the blade.
Run the battery down completely, then remove it from the tool. Batteries are recyclable. Place the battery(s) in a suitable packaging to ensure that the terminals cannot be short-circuited. Take them to any authorised repair agent or a local recycling station. MACHINERY DIRECTIVE KS900S, KS900SL, KS950SL Technical data Voltage Rated input No-load speed Max.
To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our aftersales service and contacts are available on the Internet at: www.2helpU.com Please visit our website www.blackanddecker.co.
E15143 52 40 50 51 49 53 41 37 38 48 36 39 35 30 32 1 31 28 29 33 27 22 23 9 19 16 25 20 26 45 www.2helpU.com 34 6 5 24 18 17 21 11 14 12 7 13 15 8 10 1 KS900S - KS900SL - KS950SL 44 46 42 23 - 03 - 10 47 43 56 57 59 58 1 SL TYP.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
$XVWUDOLD %ODFN 'HFNHU $XVWUDOLD 3W\ /WG )OHWFKHU 5RDG 0RRURROEDUN 9LFWRULD 1HZ =HDODQG %ODFN 'HFNHU 7H $SXQJD 3ODFH 0W :HOOLQJWRQ $XFNODQG 8QLWHG .
