KW850E 1
Copyright Black & Decker 2
4 1 2 5 12 6 11 10 9 A 7 8 3
7 6 13 5 15 14 5 15 3 mm B C 9 X 12 16 D 4 18 17 E
11 9 9 10 18 10 F G 19 H I 5
K J L 6 1 2 3 4 5 6 7 8 9 10
20 21 16 M N 25 24 23 22 O P 7
ENGLISH ROUTER KW850E CONGRATULATIONS! You have chosen a Black & Decker tool. Our aim is to provide quality tools at an affordable price. We hope that you will enjoy using this tool for many years. INTENDED USE Your Black & Decker router KW850E has been designed for routing wood and wood products. This tool is intended for consumer use only.
ENGLISH General 1. Keep work area clean Cluttered areas and benches can cause accidents. 2. Consider work area environment Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the work area well lit. Do not use the tool where there is a risk of causing fire or explosion, e.g. in the presence of flammable liquids and gases. 3. Keep children away Do not allow children, visitors or animals to come near the work area or to touch the tool or mains cable. 4.
ENGLISH Keep handles and switches dry, clean and free from oil and grease. 20. Repairs This tool complies with relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user. ELECTRICAL SAFETY The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate.
ENGLISH Using an extension cable Always use an approved extension cable suitable for the power input of this tool (see technical data). Before use, inspect the extension cable for signs of damage, wear and ageing. Replace the extension cable if damaged or defective. When using a cable reel, always unwind the cable completely. Use of an extension cable not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. Fitting a router bit (fig.
ENGLISH Fitting the centring pin (fig. O) ◆ Fit the edge guide to the router as shown in fig. C, but upside down. ◆ Fit the centring pin (22) to the workpiece side of the edge guide with the screw (23) provided. Fitting the copy follower (fig. P) ◆ Fit the edge guide to the router as shown in fig. C. ◆ Fit the ‘L’ bar (24) to the upper side of the edge guide using the two screws and nuts provided. ◆ Fit the rotating attachment (25) to the ‘L’ bar with the wing screw provided.
ENGLISH ◆ The router bit must extend below the flange of the template guide, to cut the workpiece in the shape of the template. ◆ Refer to the table below for common types of router bits. Router bits (fig. L) Using the distance piece (fig. N) The distance piece can be used for trimming wooden or laminate vertical projections. Using the centring pin (fig. O) The centring pin can be used to cut out circular patterns. ◆ Drill a hole for the point of the centring pin in the centre of the circle to be cut.
ENGLISH You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com. Technical data Voltage (Australia & New Zealand) Power input No-load speed Collet size Max. diameter of router bit Max.
TYP 1 KW850E 44 12 54 30 3 57 33 34 35 56 38 40 47 48 10 9 53 63 39 62 64 68 2 36 65 66 70 37 67 71 6 68 13 72 15 21 4 5 14 73 7 78 51 1 74 79 50 80 8 76 16 11 75 47 77 49 26 25 24 43 16 58 45 41 42 59 60 27 23 46 48 19 17 18 20 20 47 22 61 19 31 17 18 82 82 83 84 32 28 29 E13290 WWW.2helpU.
Australia DEWALT Industrial Power Tool Company 7 Clarice Road Box Hill, Victoria 3128 Tel. 03 9895 9200 Fax 03 9899 7465 New Zealand Black & Decker 81 Hugo Johnson Drive Penrose, Auckland, New Zealand Tel. 09 579 7600 Fax 09 579 8200 South Africa Black & Decker South Africa (Pty) Ltd Physical address: 39 Commerce Crescent Eastgate, ext. 12, Sandton, Kramerville 2148 Postal address: Postnet Suite 107, Private Bag X65 Halfway House 1685 Tel.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Yes No Was this tool your first purchase? Yes No Was this tool a gift? Postal code: ............................................................................................. Town: ....................................................................................................... Address: ...................................................................................................
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ GUARANTEE CARD ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ✁ Please complete this section immediately after the purchase of your tool and send it to Black & Decker in your country. If you live in Australia or New Zealand, please register by using the alternative guarantee card supplied.