www.blackanddecker.com.
A B C D 2
(Original instructions) Intended use Your Black & Decker drill/screwdriver has been designed for screwdriving applications and for drilling in wood, metal and plastics. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
ENGLISH (Original instructions) e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc.
(Original instructions) Labels on tool : The following symbols are shown on the tool: Warning! To reduce the risk of injury, the user must read the instruction manual. Additional safety instructions for batteries and chargers Batteries Never attempt to open for any reason. Do not expose the battery to water. Do not store in locations where the temperature may exceed 40 °C. Charge only at ambient temperatures between 10 °C and 40 °C. Charge only using the charger provided with the tool.
ENGLISH (Original instructions) To charge the battery, insert the charger lead into the Hints for optimum use charging socket in one way. Do not force. Be sure that the charger lead is fully seated in the charging socket. Plug in the charger and switch on at the mains. Drilling Always apply a light pressure in a straight line with the drill bit. Just before the drill tip breaks through the other side of the workpiece, decrease pressure on the tool.
(Original instructions) z Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Australia & New Zealand Stanley Black & Decker 82 Taryn Drive, Epping, VIC 3076 Australia Tel.1800 338 002 (Aust) or Tel.